SparkFun Triple Axis Accelerometer Breakout - ADXL345

16.45 19.90€ con IVA
Valoración 0/5 (0 Votos!)
Referencia: SPRKC-SEN-09836
Fabricante: Sparkfun
Sparkfun

This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.

The ADXL345 is well suited to measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0 degrees;.

Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.

Not sure which accelerometer is right for you? Our Accelerometer and Gyro Buying Guide might help!

Features:

  • 2.0-3.6VDC Supply Voltage
  • Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
  • Tap/Double Tap Detection
  • Free-Fall Detection
  • SPI and I2C interfaces

Documents:

Replaces: SEN-09156

Para obtener más información, visite la página del producto.
Para ver otros productos en esta categoria:

Comprar 3-axis »

Clientes que compraron este producto, también han comprado
OBD-II UART
Description: This board allows you to interface with your car's OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all major OBD-II standards such as CAN and JBUS. The board also ...
45.79€
Arduino DUE con ARM Cortex M3
El Arduino Due tiene una CPU de 32-bit Atmel SAM3X8E ARM Cortex M3. Aquí puedes encontrar el Arduino Mega que tiene un número de entradas y salidas similar ...
34.75€
Pololu G2 High-Power Motor Driver 24v21
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3" × 0.8" board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 21 A ...
33.29€
Crimping Tool: 0.1-1.0 mm2 Capacity 16-28 AWG
This crimping tool can be used to crimp both male and female versions of our Tamiya connector crimp pins, mini Tamiya connector crimp pins, JST connector crimp pins, JR crimp pins, Futaba J crimp pins, and crimp pins for 0.1" housings onto ...
29.13€
Conversor Analógico Digital 16-Bit ADC ADS1115 4 Canales
Basado en el ADC ADS1115 Interfaz I2C Precisión 16 bits 860 muestras por segundo Incluye amplificador de ganancia ...
18.04€
Arduino Nano
Integra todas las funciones de la Arduino Duemilanove en tamaño reducido.
Ideal para protoboard ...
17.90€
Wires with Pre-crimped Terminals 50-Piece Rainbow Assortment M-M
These premium wires are stranded 26AWG wires with male terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. The assortment of 12" (30 cm) ...
14.58€
Categorias
Fabricantes
Productos Recomendados
Teensy 3.2
SPRK-DEV-13736
Teensy 3.2
Wemos D1 ESP32 WIFI
BSK-WEMOSD1
Wemos D1 ESP32 WIFI

Electan utiliza cookies para facilitar la tramitación de pedidos, recopilar estadísticas para optimizar la funcionalidad del sitio y ofrecerte contenido personalizado.

Aceptar y Cerrar

Más información aquí