ENVIO GRATIS a partir de 80€ (Solo válido para España y Portugal)

Sparkfun Bajo Pedido

Viendo del 401 al 500 (de 563 productos)
Precios sin IVA
Sunflower Shield - 3.5" TFT w/ Cap Touch
59.98
The Sunflower shield from Cowfish Studios enables your Arduino to run extremely responsive g
SparkFun Servo pHAT for Raspberry Pi
14.86
The SparkFun Servo pHAT for Raspberry Pi allows your Raspberry Pi to control up to 16 servo motors in a straightforward and ...
Spectacle Light Kit
Spectacle Light Kit
SPRKC-KIT-14489
105.03
The Spectacle Light Kit makes it easy to illuminate your next project at the push of a button! The Light Kit provides a simple, ...
Powerfilm Solar Panel - 10.5mA@7.2V
6.31
Did you know you have a practically unlimited source of energy, half a day, fully available to power your project? This PowerFilm Solar ...
SparkFun PCB Ruler - 12 Inch
8.26
One ruler to rule them all. This is a basic 12 inch ruler, but made from a PCB. We have included a lots of useful information on each ...
Mean Well Dual Output Switching Power Supply (15VDC, -15VDC, 0.8
22.30
This is a 24W dual output switching power supply from Mean Well. This power supply is extremely reliable and able to output 15VDC at ...
SparkFun Inventor's Kit Add-On Pack - v4.0
33.03
With this Add-On Pack you will be able to incorporate some of the older parts that used to be included in the SparkFun Inventor's Kit ...
JST-PH Female to JST-SM Female Adapter - 100mm
1.89
This simple adapter wire terminates on one end with a JST-PH Female connector, and a JST-SM Female connector on the other. It can be ...
High Precision Temperature Sensor - TMP117 (Qwiic)
23.04
The TMP117AIDRVT is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with ...
SparkFun Sound Detector (with Headers)
15.30
The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detector not ...
Mini Load Cell - 100g, Straight Bar (TAL221)
14.86
This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 100g of pressure (force) into an electrical ...
SparkFun GPS Breakout - ZOE-M8Q (Qwiic)
52.55
The SparkFun ZOE-M8Q GPS Breakout is a high accuracy, miniaturized, GPS board that is perfect for applications that don't possess a lot ...
Soldering Tip - Weller - Standard (ST1)
7.52
This is a replacement soldering tip for the Weller WLC100 soldering iron. It is a s
Qwiic Ideation Kit
Qwiic Ideation Kit
SPRKC-SPX-14754
300.22
The Qwiic Ideation Kit is the smorgasbord of our best and most popular Qwiic boards. This kit allows users to get started with Arduino ...
Love to Code Chibi Scope Display Accessory
39.04
The Chibi Scope is the perfect companion to your Chibi Chip Microcontroller Board.
SparkFun Qwiic Twist - RGB Rotary Encoder Breakout
28.82
The SparkFun Qwiic Twist is a digital RGB rotary encoder breakout that is also able to connect to our Qwiic Connect System. The Twist ...
SparkFun Qwiic MicroPressure Sensor
18.88
The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. ...
SparkFun ESP32 Thing Motion Shield
27.71
The SparkFun ESP32 Thing Motion Shield is a versatile, motion-sensing addition to our ESP32 Thing. With the Motion Shield's onboard ...
NFC LED Nail Sticker - White (5 Pack)
11.56
Let your geek shine with this five pack of white NFC LED nail stickers. These nifty little things power themselves when in a capable ...
Alligator Clip with Spade Connector (10 Pack)
9.08
This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a female spade connector on the other. ...
1Sheeld+
1Sheeld+
SPRKC-CEL-14333
44.97
The 1Sheeld+ is an easily configured shield for Arduino. It has a built-in Bluetooth Low Energy (BLE) module that gives your Arduino the ...
Weller WE1010 Soldering Station
207.96
The WE1010 from Weller is a powerful 70 Watt soldering station that is perfect for passionate hobbyists, DIYers, and anyone who needs to ...
SparkFun gator:bit v2.0 - micro:bit Carrier Board
28.99
The SparkFun gator:bit v2.0 is an all-in-one ?carrier? board for your micro:bit that provides you with a fully functional development ...
Multicolor Buttons - 4-pack
Multicolor Buttons - 4-pack
SPRKC-PRT-14460
2.25
This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects! Unlike previous iterations of multicolor ...
SparkFun IR Array Breakout - 110 Degree FOV, MLX90640 (Qwiic)
84.08
It's time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of ...
SparkFun micro:climate kit for micro:bit
156.08
The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. Unlike previous ...
Sewable LED Ribbon - 1m, 50 LEDs (Blue)
19.82
Sewable LED Ribbon is quite possibly one of the easiest ways to incorporate simple illumination and color effects into your next ...
SparkFun Inventor's Kit Bridge Pack for micro:bit
52.55
Do you own a micro:bit or micro:bit Go Bundle and want to expand your skills with the new microcontroller? You are in luck! The SparkFun ...
Particle Argon IoT Development Board
41.97
The Particle Argon is an IoT development board that allows you to connect your mesh network to Wi-Fi. With the Nordic nRF52840 SoC and ...
SparkFun Roshamglo Badge Kit
18.17
The SparkFun Roshamglo is the new and fun way to play Rock-Paper-Scissors with your friends! The board uses the ATtiny84, and has an IR ...
Johnny-Five Inventor's Kit
Johnny-Five Inventor's Kit
SPRKC-KIT-14604
157.66
The Johnny-Five Inventor's Kit (J5IK) is your go-to source for developing projects using the Tessel 2 and the Johnny-Five programming ...
LimeSDR Mini
LimeSDR Mini
SPRKC-WRL-15029
300.22
The LimeSDR Mini development board is a hardware platform for developing and prototyping high-performance and logic-intensive digital ...
Reversible USB A to C Cable - 2m
10.34
USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the ...
Expansion Dock for Onion Omega
21.47
The Expansion Dock provides an easy way to power your Omega with any microUSB cable while breaking out all of the Omega?s GPIO pins. ...
Bendable EL Wire - Blue-Green 3m
13.21
Do you love EL wire but wish it was more bendable? Well look no further! This EL Wire contains a special bendable wire core that allows ...
Rotary Encoder - Illuminated (Red/Green)
4.41
Rotary encoders are used similarly to potentiometers. They're different from potentiometers in that an encoder has full rotation without ...
Amphenol FCI Clincher Connector (3 Position, Female)
1.79
These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. ...
FLIR Radiometric Lepton Dev Kit
360.28
Do you see what we see? With the FLIR Radiometric Lepton® Dev Kit you will be able to bring FLIR's thermal imaging reliability and power ...
LED Strip Pigtail Connector (2-pin)
1.79
These 2-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option ...
Cable - 5 Pin 1mm Pitch - 200mm
1.71
This is a 5 wire cable with a SHR style (1mm pitch) connector on each end. These are very similar to our Qwiic connectors and cables but ...
SparkFun Edge Development Board - Apollo3 Blue
27.25
Edge computing is here! You've probably heard of this latest entry to the long lineage of tech buzzwords like "IoT," "LoRa," and "cloud" ...
JST to JST-SM Wire - 1ft
JST to JST-SM Wire - 1ft
SPRKC-CAB-14165
2.46
This simple 24AWG wire is terminated with a male JST connector at one end and a male JST-SM connector at the other. Each wire is a foot ...
Helium Atom Prototyping Module
60.06
The Helium Atom Prototyping Module is a low-power, dual-band wireless module perfect for developers. The pin layout is compatible with ...
LTE Antenna 175mm Duck SMA Male - VT4GLTE-R-10
14.78
This high-gain duck antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands. Combined with ...
Qwiic Switch
Qwiic Switch
SPRKC-SPX-15586
7.12
Microswitches are an easy way to determine if your robot has hit a wall or if your gantry has reached an endstop, but why would you want ...
Arduino MKR1000
Arduino MKR1000
SPRKC-DEV-14394
46.55
The Arduino MKR1000 is a powerful board that combines the functionality of an Arduino Zero and a handy WiFi shield. This thin board has ...
PaPiRus ePaper / eInk Screen HAT for Pi Zero
51.05
PaPiRus Zero is an ePaper / eInk screen HAT designed for the Raspberry Pi Zero and the Raspberry Pi Zero W. It's one of the first true ...
iFixit Essential Electronics Toolkit
40.47
Having a broken phone or electronics device stinks, whether it's a screen going out, a cable becoming unplugged, or even build-up in the ...
SparkFun weather:bit
SparkFun weather:bit
SPRKC-DEV-14214
20.23
The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a ...
Large Jumper Wire Kit - 700pcs
33.03
You asked for more wires, so you are going to get more wires! This is a large kit of jumper wires - cut, stripped, and pre-bent for your ...
SparkFun LuMini LED Ring - 1 Inch (20 x APA102-2020)
13.28
This is the one inch version of the SparkFun LuMini LED Ring, packed with 20 individually addressable LEDs, each capable of producing 16 ...
SparkFun RedBoard - Programmed with Arduino
24.83
At SparkFun we use many Arduinos and we're always looking for the simplest, most stable one. Each board is a bit different and no one ...
Slice Ceramic Straight Blades (set of 4)
28.08
Metal is out; ceramic is in! This is a four-pack of Slice blades made of 100 percent hand-sharpened zirconium oxide. Each blade features ...
LED - Assorted with Resistor 5mm (20 pack)
14.45
You don?t have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack contains 20x 5mm LEDs in ...
BlackBoard Artemis Nano
BlackBoard Artemis Nano
SPRKC-SPX-15411
24.69
We like to joke the Artemis Nano is a party on the front and business on the back. And that's by design! All the important LEDs, ...
SparkFun Pi Servo HAT
SparkFun Pi Servo HAT
SPRKC-DEV-14328
14.04
The SparkFun Pi Servo HAT allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an ...
SparkFun Tool Bag Kit
SparkFun Tool Bag Kit
SPRKC-TOL-14683
97.75
This assortment of tools is great for those of you who need a portable tool assembly with plenty of room to add your own. We?ve found ...
Pimoroni Unicorn HAT
Pimoroni Unicorn HAT
SPRKC-DEV-14037
37.54
The Pimoroni Unicorn HAT is a "shield" for the Raspberry Pi that sports a matrix of 64 (8x8) addressable RGB LEDs that are powered ...
SparkFun Large Parts Box - LilyPad (Magnetic)
6.31
When you're working with e-textiles, you have a tendency to collect a lot of small parts: LilyPad boards, bobbins, needles...the tools ...
GPS Antenna Ground Plate
GPS Antenna Ground Plate
SPRKC-GPS-15004
8.18
Want to improve your GPS antenna multipath convergence time performance to near survey-grade GNSS levels? Just using this simple steel ...
SparkFun gator:particle - micro:bit Accessory Board
14.75
The SparkFun gator:particle micro:bit Accessory Board incorporates the powerful MAX30102 sensor, enabling sensing of pulse oximetry ...
SparkFun Wireless Motor Driver Shield
29.32
The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based ...
SparkFun Deluxe Tool Kit
SparkFun Deluxe Tool Kit
SPRKC-TOL-11805
355.18
This is Sparkfun?s new Deluxe Tool Kit! We?ve picked our very best tools and put together the ultimate kit of items we use on a daily ...
Zio Ultrasonic Distance Sensor - HC-SR04 (Qwiic)
20.65
You may be familiar with the classic HC-SR04 distance sensor, it is great for providing non-contact distance readings from 2cm to 400cm. ...
Spectacle Inertia Board
Spectacle Inertia Board
SPRKC-DEV-13992
16.43
The Spectacle Inertia Board makes it easy to sense motion or orientation with a Spectacle project. The Spectacle Inertia Board is ...
SparkFun Capacitive Touch Breakout - AT42QT1011
8.19
If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1011 SparkFun ...
Particulate Matter Sensor - SPS30
60.89
The Sensirion Particulate Matter Sensor SPS30 is a compact, high quality, optical particle sensor that uses laser scattering and ...
SparkFun Lightning Detector - AS3935
29.93
The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potential ...
SparkFun Lumenati 8-stick
SparkFun Lumenati 8-stick
SPRKC-COM-14359
12.06
The SparkFun Lumenati 8-stick is a small board equipped with eight APA102C LEDs in a row and two mounting positions, that has been ...
PowerFilm Solar Panel - 50mA@4.8V w/PSA & Kynar (5 Pack)
37.54
Did you know you have a practically unlimited source of energy, half a day, fully available to power your project? This five pack of ...
XLR-3 Cable - 25ft
XLR-3 Cable - 25ft
SPRKC-CAB-15310
23.04
This is a 25 foot (~7.6m) long XLR-3 cable capable of better communications for lighting and special effects through standard or digital ...
STEMTera (Blue)
STEMTera (Blue)
SPRKC-DEV-14278
66.07
The STEMTera is an innovation in breadboard history. It is the first breadboard with an Arduino-compatible hardware suite built in that ...
Robotic Finger Sensor v2
Robotic Finger Sensor v2
SPRKC-SPX-14687
59.98
Does your robot crush objects with its hulkishly strong grip? Give your robotic hand or claw a better sense of touch with the Robotic ...
SparkFun Grid-EYE Infrared Array Breakout - AMG8833 (Qwiic)
58.56
Get ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array, meaning ...
UHF RFID Ring Antenna
UHF RFID Ring Antenna
SPRKC-SPX-15113
16.43
Eager to try out the new Ultra-small UHF RFID Rain Tags it quickly became apparent
Spectacle Light and Sound Kit
180.18
The Spectacle Light and Sound Kit makes it easy to incorporate button-activated sound and light effects into your projects with ease! ...
SparkFun Logic Level Converter - Single Supply
23.12
The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board ...
SparkFun TFT LCD Breakout - 1.8" (128x160)
39.94
The SparkFun TFT LCD Breakout is a versatile, colorful, and easy way to experiment with graphics or create a user interface for your ...
Xcelite Ergonomic Screwdriver Set (6pcs)
63.06
The Xcelite Ergonomic Screwdriver Set provides six different screwdrivers, each featuring a shockproof ergonomic soft inner core and ...
Atto84 with Arduino Bootloader
9.83
Arduino and Arduino compatible dev boards are an awesome tool for developing an idea quickly but, being development boards, they're ...
Chibitronics Circuit Stickers Effects Add-On Pack
28.08
If you already have or are looking to own some Circuit Stickers from Chibitronics you may be looking to add a few effects to your LEDs. ...
SparkFun Infrared Control Kit
14.04
Have you ever needed an easy and effective way to activate electronics from across the room? Infrared remotes are still the cheapest way ...
Break Away Male Headers - Right Angle
2.84
A row of right angle male headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom ...
Fairy Lights - Green (2.5m)
Fairy Lights - Green (2.5m)
SPRKC-PRT-14504
7.21
Affectionately dubbed "Fairy Lights" for their similar appearance, these LED string lights are a great way to light up any project with ...
Slide Potentiometer Knob - Small and Medium
1.54
This is a simple knob that connects to the small and
J-Link BASE Compact Programmer
713.21
The J-Link line of JTAG programmers from Segger is well known for their top of the line debuggers. The J-Link BASE is a USB powered JTAG ...
USB OTG Cable - Female A to Micro B - 5in
4.59
USB On-The-Go (OTG) is a really useful USB specification! It allows some small devices that would normally be unable to act as a host to ...
SparkFun Traveler microB Cable - 1m
4.98
Are you a traveler? Do you remove ever ounce of extra weight from your gear? The SparkFun 1 meter Traveler microB cable is designed for ...
XBee 3 Pro Module - U.FL Antenna
46.47
After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules, we now have the XBee Series 3 Pro which brings the best ...
SparkFun Ardumoto - Motor Driver Shield
28.16
The Ardumoto Shield is a dual-motor controller for Arduino. Based on the L298 H-bridge, the SparkFun Ardumoto can drive two DC motors up ...
pi-topPROTO
pi-topPROTO
SPRKC-DEV-14356
11.55
The pi-topPROTO is a HAT-compatible add-on board for prototyping electronics for your pi-top or pi-topCEED. With plenty of space ...
bladeRF 2.0 micro Enclosure
bladeRF 2.0 micro Enclosure
SPRKC-PRT-15044
30.03
This is a simple, transparent enclosure designed to protect your bladeRF 2.0 micro from external threats. The enclosure is made of a ...
EasyVR 3 Plus Shield for Arduino
65.39
Do you make time to talk to your Arduino? Maybe you should! The EasyVR 3 Plus Shield is a voice recognition shield for Arduino boards ...
Global Power Supply - 15V 4.34A
45.05
This isn't your ordinary power supply. The Global Power Supply is a 15V, 4.34A power device specifically designed to work with the ...
Skinny Side-Lit LED RGB Strip - Addressable, 1m, 60LEDs (SK6812)
19.82
These are side-lit addressable 1-meter-long 5V RGB LED strips that come packed with 60 SK6812s. SK6812 LEDs are very similar to WS2812s ...
Particle Boron LTE IoT Development Kit
106.53
The Particle Boron is a LTE CAT-M1/NB1 enabled development board that allows you to connect your mesh network over a cellular service. ...
Adam Tech Wall Adapter Cable - Three Terminal (NA)
6.31
These Adam Tech Wall Adapter Cables are terminated with a standard North American (NEMA 5--15P) plug at one end and three insulated ...
Pressure Sensor (Qwiic) - MS5637
11.48
MEMs based barometric pressure sensors are quite common these days. The Qwiic Pressure Sensor with the MS5637 shines by being the most ...
Thermal Printer
Thermal Printer
SPRKC-COM-14970
72.07
This is a thermal printer like you would find on a cash register or adding machine. It will print simple strings passed to it via TTL ...
Reversible USB A to Reversible Micro-B Cable - 0.8m
7.30
These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait, what's this? These cables have minor, yet genius ...
Distribuidor para España y Portugal
Microbit
DFRobot
Sparkfun
Makey
Lilypad
Adafruit
Pololu
Cebek
Arduino
Pimoroni
Elecfreaks
Waveshare

Electan utiliza cookies propias y de terceros para facilitar la tramitación de pedidos, recopilar estadísticas para optimizar la funcionalidad del sitio y ofrecerte contenido personalizado.

Aceptar y Cerrar

Más información aquí