ENVIO GRATIS a partir de 80€ (Solo válido para España y Portugal)

Sparkfun Bajo Pedido

Viendo del 501 al 562 (de 562 productos)
Precios sin IVA
Capacitive Fingerprint Scanner - UART (AD-013)
26.43
Fingerprint scanners have been easily available at a consumer level for a number of years now, so it is only logical that they would ...
Sewable LED Ribbon - 1m, 50 LEDs (Green)
19.82
Sewable LED Ribbon is quite possibly one of the easiest ways to incorporate simple illumination and color effects into your next ...
Bendable EL Wire - Green 3m
Bendable EL Wire - Green 3m
SPRKC-COM-14698
13.21
Do you love EL wire but wish it was more bendable? Well look no further! This EL Wire contains a special bendable wire core that allows ...
SparkFun RFID Qwiic Reader
SparkFun RFID Qwiic Reader
SPRKC-SEN-15191
24.83
The SparkFun RFID Qwiic Reader is a simple I2C based RFID breakout board for the ID-3LA, ID-12LA, and ID-20LA readers. Simply ...
RELAYplate
RELAYplate
SPRKC-DEV-14150
61.56
The RELAYplate from Pi-Plates is the first dedicated relay board for the Raspberry Pi designed to meet the safety requirements of UL ...
Johnny-Five Inventor's Kit
Johnny-Five Inventor's Kit
SPRKC-KIT-14604
157.66
The Johnny-Five Inventor's Kit (J5IK) is your go-to source for developing projects using the Tessel 2 and the Johnny-Five programming ...
SparkFun USB-C Breakout
SparkFun USB-C Breakout
SPRKC-BOB-15100
7.12
With this USB breakout you will finally be able to incorporate a USB-C connector into your projects without needing to solder each tiny ...
915MHz LoRa Antenna RP-SMA - 1/4 Wave 2dBi
11.49
A small 1/4 wave rubber duck antenna for LoRa or other 860-960MHz communication. Antenna has a center frequency of 915MHz and utilizes ...
Expansion Dock for Onion Omega
21.47
The Expansion Dock provides an easy way to power your Omega with any microUSB cable while breaking out all of the Omega?s GPIO pins. ...
SparkFun 16x2 SerLCD - Black on RGB 3.3V
26.43
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on ...
SparkFun Transparent OLED HUD Breakout (Qwiic)
130.63
Clear screens are no longer a thing of the Sci-Fi world! The Qwiic Transparent OLED HUD is SparkFun's answer to all of your futuristic ...
SparkFun Block for Intel® Edison - Raspberry Pi B (with Headers)
20.65
This is a Ding and Dent version of our Raspberry Pi B Block for the Intel® Edison. This block has headers pre-soldered on, which means ...
Slice Ceramic Straight Blades (set of 4)
28.08
Metal is out; ceramic is in! This is a four-pack of Slice blades made of 100 percent hand-sharpened zirconium oxide. Each blade features ...
SparkFun Qwiic Cable Kit
SparkFun Qwiic Cable Kit
SPRKC-KIT-15081
11.56
The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, we've ...
Teensy Audio Adaptor Board
Teensy Audio Adaptor Board
SPRKC-DEV-15421
21.88
This is the Teensy Audio Adapter Board that can be added to a Teensy 3.0, 3.1, 3.2, 3.5 or 3.6 for your next audio project. The shield ...
SparkFun Pi Servo HAT
SparkFun Pi Servo HAT
SPRKC-DEV-14328
14.04
The SparkFun Pi Servo HAT allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an ...
SparkFun I2S Audio Breakout - MAX98357A
8.19
The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analog converter (DAC), which converts I2S (not
Cherry MX Keycap - R2 (Opaque Black)
1.54
Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard, your own ...
Audio Cable TRRS - 3ft
Audio Cable TRRS - 3ft
SPRKC-CAB-14164
3.60
This is a 3-foot-long white audio cable that has been terminated with two TRRS connectors at each end. TRRS connectors are the 3.5mm ...
Helium Atom Prototyping Module
60.06
The Helium Atom Prototyping Module is a low-power, dual-band wireless module perfect for developers. The pin layout is compatible with ...
SparkFun gator:bit
SparkFun gator:bit
SPRKC-DEV-14484
28.08
The SparkFun gator:bit is an all-in-one ?carrier? board for your micro:bit that provides you with a fully functional development and ...
SparkFun Qwiic Starter Kit for Onion Omega
180.18
When the minds at SparkFun and Onion get together we can make something truly awesome! The SparkFun Qwiic Starter Kit for Onion Omega is ...
Arduino MKR1000
Arduino MKR1000
SPRKC-DEV-14394
46.55
The Arduino MKR1000 is a powerful board that combines the functionality of an Arduino Zero and a handy WiFi shield. This thin board has ...
SparkFun Basic Flashlight Soldering Kit
7.52
Are you new to soldering and want to learn the basics with one easy kit? This Flashlight Soldering Kit is an easy to assemble soldering ...
Header - 2x5 Pin (Female, 1.27mm)
2.70
This is a super small, 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a ...
SparkFun moto:bit
SparkFun moto:bit
SPRKC-DEV-14213
18.42
The SparkFun moto:bit is a fully loaded "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a ...
Stomp Switch
Stomp Switch
SPRKC-COM-15133
6.40
These are the sturdy little stomp switches that you find on guitar effects pedals. They?re 3PDT (three-pole, double-throw) type ...
SparkFun Lumenati 8-stick
SparkFun Lumenati 8-stick
SPRKC-COM-14359
12.06
The SparkFun Lumenati 8-stick is a small board equipped with eight APA102C LEDs in a row and two mounting positions, that has been ...
Neutis Development Kit
Neutis Development Kit
SPRKC-DEV-14972
360.28
Ever since the Edison left us we've been looking for an equal or greater replacement to fill the hole in our hearts. Introducing the ...
Header - 2x5 Pin (Male, 1.27mm)
2.70
This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing ...
SparkFun ESP8266 Thing - Dev Board (with Headers)
24.26
This is the SparkFun ESP8266 Thing Dev Board --- a development board that has been solely designed around the ESP8266, with an ...
SparkFun Grid-EYE Infrared Array Breakout - AMG8833 (Qwiic)
58.56
Get ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array, meaning ...
Servo - Generic Metal Gear (Micro Size)
17.29
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 ...
SparkFun Qwiic OpenLog
SparkFun Qwiic OpenLog
SPRKC-DEV-15164
24.03
The SparkFun Qwiic OpenLog is the smarter and better looking cousin to the extremely popular OpenLog but now we've ported the original ...
SparkFun RFM69 Breakout (434MHz)
16.11
This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as ...
SparkFun Large Parts Box - LilyPad (Magnetic)
6.31
When you're working with e-textiles, you have a tendency to collect a lot of small parts: LilyPad boards, bobbins, needles...the tools ...
Sunflower Shield - 3.5" TFT w/ Cap Touch
59.98
The Sunflower shield from Cowfish Studios enables your Arduino to run extremely responsive g
SparkFun Servo pHAT for Raspberry Pi
14.86
The SparkFun Servo pHAT for Raspberry Pi allows your Raspberry Pi to control up to 16 servo motors in a straightforward and ...
SparkFun Wireless Motor Driver Shield
29.32
The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based ...
Powerfilm Solar Panel - 10.5mA@7.2V
6.31
Did you know you have a practically unlimited source of energy, half a day, fully available to power your project? This PowerFilm Solar ...
SparkFun PCB Ruler - 12 Inch
8.26
One ruler to rule them all. This is a basic 12 inch ruler, but made from a PCB. We have included a lots of useful information on each ...
Spectacle Director Board
Spectacle Director Board
SPRKC-DEV-13912
29.73
The Spectacle Director Board controls all the actions in a Spectacle project. Though the Director Board doesn't do too much on its own, ...
SparkFun Capacitive Touch Breakout - AT42QT1011
8.19
If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1011 SparkFun ...
LilyPad Light Sensor
LilyPad Light Sensor
SPRKC-DEV-14629
6.09
The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor ...
Raspberry Pi GPIO Male Header - 2x20
1.54
This 2x20 male header has the same number and spacing of pins as a Raspberry Pi but is best served when used in conjunction with the Pi ...
Mini Load Cell - 100g, Straight Bar (TAL221)
14.86
This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 100g of pressure (force) into an electrical ...
SparkFun GPS Breakout - ZOE-M8Q (Qwiic)
52.55
The SparkFun ZOE-M8Q GPS Breakout is a high accuracy, miniaturized, GPS board that is perfect for applications that don't possess a lot ...
Pocket Geiger Radiation Sensor - Type 5
90.09
The Type 5 Pocket Geiger Radiation Sensor from Radiation Watch is a highly sensitive radiati
pi-topPROTO
pi-topPROTO
SPRKC-DEV-14356
11.55
The pi-topPROTO is a HAT-compatible add-on board for prototyping electronics for your pi-top or pi-topCEED. With plenty of space ...
Qwiic Ideation Kit
Qwiic Ideation Kit
SPRKC-SPX-14754
300.22
The Qwiic Ideation Kit is the smorgasbord of our best and most popular Qwiic boards. This kit allows users to get started with Arduino ...
SparkFun Qwiic Twist - RGB Rotary Encoder Breakout
28.82
The SparkFun Qwiic Twist is a digital RGB rotary encoder breakout that is also able to connect to our Qwiic Connect System. The Twist ...
Spectacle Light and Sound Kit
180.18
The Spectacle Light and Sound Kit makes it easy to incorporate button-activated sound and light effects into your projects with ease! ...
NFC LED Nail Sticker - White (5 Pack)
11.56
Let your geek shine with this five pack of white NFC LED nail stickers. These nifty little things power themselves when in a capable ...
Alligator Clip with Spade Connector (10 Pack)
9.08
This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a female spade connector on the other. ...
Solder Tip Polishing Bar
Solder Tip Polishing Bar
SPRKC-TOL-14233
18.17
Do you need to remove the oxidation and surface contamination from your soldering iron tip? The Solder Tip Polishing Bar allows you to ...
Chibitronics Circuit Stickers Effects Add-On Pack
28.08
If you already have or are looking to own some Circuit Stickers from Chibitronics you may be looking to add a few effects to your LEDs. ...
Weller WE1010 Soldering Station
207.96
The WE1010 from Weller is a powerful 70 Watt soldering station that is perfect for passionate hobbyists, DIYers, and anyone who needs to ...
SparkFun gator:bit v2.0 - micro:bit Carrier Board
28.99
The SparkFun gator:bit v2.0 is an all-in-one ?carrier? board for your micro:bit that provides you with a fully functional development ...
SparkFun Qwiic Scale - NAU7802
19.08
The SparkFun Qwiic Scale is a small breakout board for the NAU7802 that allows you to easily read load cells to accurately measure the ...
Fairy Lights - Green (2.5m)
Fairy Lights - Green (2.5m)
SPRKC-PRT-14504
7.21
Affectionately dubbed "Fairy Lights" for their similar appearance, these LED string lights are a great way to light up any project with ...
JST-PH Female to JST-SM Female Adapter - 100mm
1.89
This simple adapter wire terminates on one end with a JST-PH Female connector, and a JST-SM Female connector on the other. It can be ...
High Precision Temperature Sensor - TMP117 (Qwiic)
23.04
The TMP117AIDRVT is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with ...
Distribuidor para España y Portugal
Microbit
DFRobot
Sparkfun
Makey
Lilypad
Adafruit
Pololu
Cebek
Arduino
Pimoroni
Elecfreaks
Waveshare

Electan utiliza cookies propias y de terceros para facilitar la tramitación de pedidos, recopilar estadísticas para optimizar la funcionalidad del sitio y ofrecerte contenido personalizado.

Aceptar y Cerrar

Más información aquí