Touch screen breakout board (0.5mm FPC)

5.19 6.28€ VAT included
Rated 0/5 (0 Votes!)
Model: ADFC-334
Manufacturer: Adafruit
Adafruit

If you've got a resistive touch screen that you'd like to use, you'll need this breakout! It has a fine pitch (0.5mm) connector soldered onto it and it's broken out into the 4 resistive wires of the panel.

A petite 0.5"x0.5" (12.5mm x 12.5mm) with two mounting holes as well, that you can use for strain relief. Works perfectly with our 3.2" touch screen

Check out our great example Arduino library code that shows how to get readings, debounce, and read the pressure from any touch screen (so you can detect when its being touched and how hard) The code is not complex and is easily ported to other microcontrollers.

For more information, please visit this products webpage.
More products in this category:

Buy Adafruit Europe Official Distributor »

More Featured Products
Arduino UNO Rev3 Original with ATMega328
Arduino is an open-source physical computing platform based on a simple i/o board and a user friendly development environment that implements the Processing/Wiring language. Arduino UNO is the enhanced release of Duemilia ...
22.45€ 18.95€
Arduino MEGA with Atmega2560
The new Arduino Mega is using an ATMEGA2560 processor. 256KB of Flash 8KB RAM 4KB EEPROM It has 53 IO (including 4 HW UARTs, 14 PWMs, I2C bus) and 16 Analog Input pins. It can mount and use most of the ...
34.50€
NodeMCU V3 IOT ESP8266 development kit
The NodeMcu is an open-source firmware and development kit that helps you to Prototype your IOT product within a few Lua script lines. Features: Open-source Interactive Programmable Low ...
5.75€
LilyPad Arduino 328 Main Board
The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, ...
15.19€
Pressure-Sensitive Conductive Sheet (Velostat/Linqstat)
This conductive material (also known as "Velostat" or "Linqstat") is a nice addition for your wearable/sensor hacking toolkit. It's pressure-sensitive: squeezing it will reduce the resistance, so it's handy for making flexible sensors. ...
4.96€
Electric Heating Pad - 10cm x 5cm
This is hot! Literally! Apply 5-12VDC and the stainless steel fibers in this heating fabric will warm up, creating a little heating pad. On one hand, it's just a gigantic resistor. On the other hand, it's flexible, light, and can be ...
5.44€
Circuit Playground Express - Base Kit
It's the Circuit Playground Express Base Kit! It provides the few things you'll need to get started with the new Circuit Playground Express. This version of Circuit ...
32.80€
Europe Official Distributor
Adafruit
Pololu
Sparkfun
Makey makey
Lilypad
Arduino

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice