Standard Gripper Kit B - Straight Mount

11.99 14.51€ VAT included
Rated 0/5 (0 Votes!)
Model: SPRKC-ROB-13175
Manufacturer: Sparkfun
Sparkfun

This is the Standard Gripper Kit B, a simple and durable robotics kit that is great for “getting a grip” on pretty much any robotics project! Designed for use with any standard size Hitec or Futaba servo, the gripper kit is easy to assemble and requires only a Phillips Head Screwdriver. This Standard Gripper is capable of opening an impressive 6" wide max, has an overall body length of 5" long with a 1.3" wide servo housing body, and offers 6-32 mounting thru-holes along the edges of the servo housing.

Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

Note: This kit does NOT include a servo. Check the Recommended Products section below for great standard size servo options.

Features:

  • Opening Width - 6" (152mm)
  • Mounting Hole ID - 0.1" (3.5mm)

Documents:

For more information, please visit this products webpage.
More products in this category:

Buy Kits »

More Featured Products
Arduino MEGA with Atmega2560
The new Arduino Mega is using an ATMEGA2560 processor. 256KB of Flash 8KB RAM 4KB EEPROM It has 53 IO (including 4 HW UARTs, 14 PWMs, I2C bus) and 16 Analog Input pins. It can mount and use most of the ...
34.50€
40 Pin Female-Female Splittable Jumper Wire 200mm
This is a splittable 40 pin 200mm length jumper wire for ...
2.87€
Teensy 3.6
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.6 comes pre-flashed with a bootloader so you can program it using the onboard USB connection; no external programmer ...
32.70€
Arduino Shield Ethernet W5100
The Arduino Ethernet shield allows an Arduino board to connect to a LAN. Includes Micro-SD ...
14.33€
Raspberry Pi 3 Model B+ 2018 WiFi Bluetooth
New RaspberryPi 3 Model B+ 2018 with ARM11 Cortex-A53 64-bit 1,4 GHz This board have the same form factor as Raspberry Pi Model B+. - ARM 11 Cortex-A53 64 bits 1,4 GHz BCM2837 - 1GB LPDDR2 SDRAM - WiFi 802.11 ...
46.95€
Circuit Playground Express - Base Kit
It's the Circuit Playground Express Base Kit! It provides the few things you'll need to get started with the new Circuit Playground Express. This version of Circuit ...
32.80€
Adafruit WINC1500 WiFi Shield with PCB Antenna
Connect your Arduino-compatible to the Internet with this WiFi shield that features the FCC-certified ATWINC1500 module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with SSL support ...
27.33€
Europe Official Distributor
Adafruit
Pololu
Sparkfun
Makey makey
Lilypad
Arduino

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice