DRV8825 Stepper Motor Driver Carrier High Current

9.65€ 11.68€ VAT included
Rated 5/5 (1 Vote)
Model: POL-2133
Manufacturer: Pololu
Pololu
In Stock Available for immediate delivery
This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. This board ships with 0.1" male header pins included but not soldered in.
For more information, please visit this products webpage.
More products in this category:

Motor Drivers »

Customers who bought this product also purchased
Arduino MEGA with Atmega2560
The new Arduino Mega is using an ATMEGA2560 processor. 256KB of Flash 8KB RAM 4KB EEPROM It has 53 IO (including 4 HW UARTs, 14 PWMs, I2C bus) and 16 Analog Input pins. It can mount and use most of the ...
34.50€ 27.75€
Arduino UNO Rev3 Original with ATMega328
Arduino is an open-source physical computing platform based on a simple i/o board and a user friendly development environment that implements the Processing/Wiring language. Arduino UNO is the enhanced release of Duemilia ...
22.45€ 18.95€
Stepper Motor NEMA 17
These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Features: Step Angle (degrees) : ...
18.31€
Stepper Motor Bipolar 42x42mm
Features: Step Angle (degrees) :1.8 2 Phase Rated Voltage : 12V Rated Current : 0.33A Holding Torque : 2.3kg*cm 5mm Diameter Drive ...
16.20€
Arduino Pro Mini 328 5V 16MHz
Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. Features: ATmega328 running at 16MHz with external resonator (0.5% tolerance) USB ...
9.92€
Gears for Robotics Module 1
Includes axis of 125 mm and diameter 3 mm, that can be cut to the wished length. The C-6084 is an assortment of gears of module 1 Includes: Flat gears of 10, 15, 20 and 40 ...
9.41€
Flex Sensor Sparkfun
A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of ...
8.95€

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice