SparkFun Qwiic Flex Glove Controller

61.26
74.12€ con IVA
Referencia: SPRKC-SEN-14666
Fabricante: Sparkfun

Flex sensors are great for telling how bent something is in a project, but we?ve been running into issues with durability when using them in wearable applications like gloves. The SparkFun Qwiic Flex Glove Controller isolates the weak point on each flex sensor to allow for more permanent applications. Essentially, this board allows you to incorporate flex sensors into a glove to control lighting, sound, and other effects making it perfect for wearable and e-textile applications! To make it even easier to use this controller, all communication is enacted exclusively via I2C, utilizing our handy Qwiic system. However, we still have broken out 0.1" spaced pins in case you prefer to use a breadboard.

The Qwiic Flex Glove Controller has been equipped with an on-board ADS1015 ADC to I2C chip, that way you will be able to get a multitude of analog inputs without needing to touch the microcontroller?s ADC pins. If you plan to incorporate this controller board into gloves (since that is what it was originally designed for) to get sensors on eight fingers (thumbs not included), you will need four Qwiic Flex Glove Controllers. With two gloves equipped with these boards you can even begin making your own VR glove controllers! If you have four controllers on the same I2C bus, you?ll need to use every address available to the ADS1015, luckily there are four available!


The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can?t hook it up wrong.


Features:

  • Operating Voltage: 2.0V - 5.5V
  • Operating Temperature: -40°C - 125°C
  • Resolution: 12 bit
  • Sample Rate: 128Hz - 3.3kHz
  • Current Consumption: 150µA (Typ.)
  • I2C Address: 0x48 (default), 0x49, 0x4A, 0x4B
  • 2x Sewing Holes
  • 2x Qwiic connectors

Documents:

Videos

Para obtener más información, visite la página del producto.
Otros productos que pueden ser de su interés

Makey Makey Original Classic

49.50€ 46.45€

El Makey Makey es un kit de creación interactiva que convierte prácticamente cualquier objeto común en diferentes teclas táctiles con lo que se puede ...

Portapilas CR2032 para Coser

3.87€ 1.94€

50% DESCUENTO SOLO hasta fin de existencias. Añade el producto al carro y aumentando la cantidad podrás ver cuantas unidades quedan ...

Cinta Adhesiva de Cobre 5mm

5.06€ 2.53€

Esta cinta de cobre permite variedad de aplicaciones, desde crear pistas para componentes electrónicos a fabricar antenas. Ancho 5mm. Longitud: 15m.50% DESCUENTO SOLO hasta fin de ...

Kit Micro:bit Go V2 con Portapilas, Pilas y Cable

18.95€

Este kit incluye: Micro:bit V2 Cable USB corto Portapilas para 2 pilas AAA 2 pilas ...

Kit Casa Inteligente para micro:bit Smart Home Kit

49.50€

Crea un hogar inteligente programando con micro:bit. Puedes usarlo para crear muchos proyectos diferentes, como un ventilador inteligente, luces activadas por voz, ventanas automáticas y más. Se adapta a la programación gráfica de ...

Robot Maqueen para Micro:bit DFRobot

37.93€

El Robot Maqueen para Micro:bit de DFRobot está diseñado específicamente para fomentar el interés de los niños en la ciencia y el pensamiento lógico a través de la educación STEM. ...

Robot Maqueen con Placa Micro:bit V2 Incluida

53.95€

Incluye La placa Micro:bit V2 y el robot Maqueen El Maqueen es un robot de programación ...

Copyright © 2006-2025 Electan Electrónica y Robótica
Electan
Tu Tienda Donde Comprar Micro:bit, Maqueen, Arduino y Robotica On Line. Todo lo que necesitas para tus proyectos a un click

Ubicacion: Elche, España

Teléfono: 966 410 250

E-Mail: info@electan.com