Circular Robotics Chassis Kit (Two-Layer)

16.37 19.81 VAT included
Rated 0/5 (0 Votes!)
Model: SPRKC-ROB-14332
Manufacturer: Sparkfun
Sparkfun

The two-layer Circular Robotics Chassis Kit is a sturdy, miniature robotics kit designed for beginners and experienced roboticists alike. The chassis plates are made from two 1.5mm aluminum alloy frames milled with plenty of mounting points for sensors, servos, controllers, power and more. Assembly is simple; with just a few included screws needed for construction, you will have a reliable 2WD robotics chassis.

The Circular Robotics Chassis Kit does not include any motors or motor controllers, allowing you to choose your own. The kit, however, does include wheels, frames, a ball caster and all assembly materials like screws, bolts and standoffs. In our opinion, this is one of the most durable and economical chassis we have used in quite some time, and it works amazingly well with a Raspberry Pi, the SparkFun moto:bit or our Wireless Motor Driver Shield.

Note: The Circular Robotics Chassis Kit does NOT include motors, a motor controller or a power source. These items will need to be purchased separately. Assembly is required.

Includes:

  • 2x Aluminum Alloy Plate
  • 2x Aluminum Alloy DC Motor Bracket
  • 2x Wheel
  • 1x Ball Caster
  • 1x Assembly Material Bag

Features:

  • 100mm x 80mm x 27mm (Assembled)

Videos

For more information, please visit this products webpage.
More products in this category:

Buy Sparkfun On Demand »

More Featured Products
12.33
Arduino Pro Mini 328 5V 16MHz
Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. Features: ATmega328 running at 16MHz with external resonator (0.5% tolerance) USB ...
9.92
Vacuum Pump - 12V
Description: This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. We even used one to make our very own ...
16.78
40 Pin Male-Female Splittable Jumper Wire 200mm
This is a splittable 40 pin 200mm length jumper wire for ...
3.34
Teensy 3.6
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.6 comes pre-flashed with a bootloader so you can program it using the onboard USB connection; no external programmer ...
32.70
Adafruit WINC1500 WiFi Shield with PCB Antenna
Connect your Arduino-compatible to the Internet with this WiFi shield that features the FCC-certified ATWINC1500 module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with SSL support ...
27.33
Teensy 4.0
Teensy 4.0 is the latest Teensy, offering the fastest microcontroller and powerful peripherals in the Teensy 1.4 by 0.7 inch form factor. It features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest ...
23.79
Europe Official Distributor
Adafruit
Pololu
Sparkfun
Makey makey
Lilypad
Arduino

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice