NeoPixel Warm White LED w/ Integrated Driver Chip - 10 Pack

Referencia: ADFC-2376
Fabricante: Adafruit
Disponible: Descatalogado

For those of us who are maybe a little tired of rainbows, we now have 'smart LEDs' in monochrome! Make your own smart Warm White LED arrangement with the same integrated LED driver that is used in our NeoPixel LED strips.  Unlit, the color resembles an egg yolk. Lit up these are insanely bright (like ow my eye hurts) and can be controlled with 24 bit high-frequency PWM. The phosphor helps diffuse the 3 white dies inside together for a very bright but consistant light, compared to what you get by trying to mix RGB to make white (which never quite looks right)

This tiny 5050 (5mm x 5mm) SMD LED is fairly easy to solder and is the most compact way possible to integrate multiple bright LEDs to a design. If you want to prototype with these, we recommend our 5050-size LED breakout PCBs, solder them on for a breadboard-friendly package

NeoPixel LEDs use 800 KHz protocol so specific timing is required. On NeoPixels, the PWM rate is 400 Hz, which works well but is noticable if the LED is moving. In comparison, DotStars have a 20 KHz PWM rate, so even when moving the LED around, you won't see the pixelation, the blending is very smooth. (we recommend DotStars if you can use them!)

NeoPixels are 5050-sized LEDs with an embedded microcontroller inside the LED. You can set the brightness of each of 3 individual cool white dies epoxied into the case. Each LED acts like a shift register, reading incoming data on the input pins, and then shifting the previous data out on the output pin. By sending a long string of data, you can control an infinite number of LEDs, just tack on more or disconnect unwanted LEDs at the end. The PWM is built into each LED-chip so once you set the brightness you can stop talking to the strip and it will continue to PWM all the LEDs for you.

Comes in a package with 10 individual LEDs.

We have a tutorial showing wiring, power usage calculations, example code for usage, etc. for NeoPixel Please check it out! Please note that the tutorial and code talk about RGB, but of course, this LED is just WWW, three individual white LEDs instead.

 

 

Para obtener más información, visite la página del producto.
Para ver otros productos en esta categoria:

 »

Otros productos que pueden ser de su interés

Arduino Starter Kit Español Original

99.95€ 82.60€

El Arduino Starter Kit es el kit oficial de Arduino para realizar 15 proyectos de diferentes niveles de dificultad, incluye un manual en español y todos los componentes necesarios. Kit Arduino Original con Manual en ...

Cables de Prueba Pinza Cocodrilo 10 Unidades

3.25€

Varios colores. Longitud 30cm. 2 unidades de cada ...

Kit 37 Sensores Arduino

14.50€

Incluye: 1. Módulo Joystick 2. Módulo relé 5V 3. Módulo micrófono pequeño 4. Módulo micrófono grande 5. Módulo seguidor de linea 6. Módulo detector de obstáculos 7. Módulo Sensor de llama 8. ...

Portapilas AAA con conector para micro:bit

1.90€

Este portapilas esta diseñado específicamente para la placa BBC Micro:bit y tiene un cable de 150mm con el conector ...

Micro:bit V2.2 con BLE 5.0 Micrófono Altavoz y Acelerómetro

16.95€

La BBC micro:bit v2 es una computadora de bolsillo que te permite ser creativo con la tecnología digital. ¡Puedes codificar, personalizar y controlar la micro:bit desde cualquier lugar! Puedes usar tu micro:bit V2 para todo tipo de ...

Robot Maqueen con Placa Micro:bit V2 Incluida

54.45€

Incluye La placa Micro:bit V2 y el robot Maqueen El Maqueen es un robot de programación ...

Cable USB 2.0 Terminales A y Micro B 15 cm Micro:bit

1.25€

Cable USB estándar de 15 cm. de largo. ideal para la placa ...

Copyright © 2006-2024 Electan Electrónica y Robótica
Electan
Tu Tienda Donde Comprar Micro:bit, Maqueen, Arduino y Robotica On Line. Todo lo que necesitas para tus proyectos a un click

Ubicacion: Elche, España

Teléfono: 966 410 250

E-Mail: info@electan.com