Have you put up with mainstream, uninspiring, low-tech tree ornaments for too long? This season why not deck the halls with codes of holly?
This DIY Ornament Kit is just the right size (7 cm diameter) for a micro:bit, a 2xAAA battery pack, and however you'd like to dress up your ornament! Your local hobby shop fluff puff balls and other materials will diffuse those on-board LEDs nicely.
Of course you can very easily see the LED grid on your 'bit and the onboard motion and temperature sensors work just fine. For capacitive touch you can use some conductive tape and attach it to the inner surface to create a capacitive touch pad. Since you can't press the buttons easily, try using the accelerometer to detect when the ball is shaken to make it do stuff!
Doesn't come with a micro:bit or battery pack, so pick one up to go along!
El Arduino Starter Kit es el kit oficial de Arduino para realizar 15 proyectos de diferentes niveles de dificultad, incluye un manual en español y todos los componentes necesarios. Kit Arduino Original con Manual en ...
Varios colores. Longitud 30cm. 2 unidades de cada ...
El Robot Maqueen para Micro:bit de DFRobot está diseñado específicamente para fomentar el interés de los niños en la ciencia y el pensamiento lógico a través de la educación STEM. ...
Incluye: -Micro:bit V2 con BLE 5.0 Micrófono Altavoz y Acelerómetro -Funda Azul para Micro:bit V2 -Portapilas AAA con conector para micro:bit -Cable USB 2.0 Terminales ...
Incluye La placa Micro:bit V2 y el robot Maqueen El Maqueen es un robot de programación ...
Cable USB estándar de 15 cm. de largo. ideal para la placa ...
Este mapa multifuncional de 120 x 90 cm está especialmente diseñado para aplicaciones de seguimiento de líneas. Hay líneas negras con una anchura de 2 cm impresas en el papel de mapa de 120 g, que es de alta calidad y no es fácil de ...