Rugged Metal Pushbutton with White LED Ring

Referencia: ADFC-558
Fabricante: Adafruit
Disponible: Descatalogado

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a white plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the white LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there's a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA.

This button is a momentary push button, when you press it the 'normally-open' contact shorts to the common contact. When you release it, the contacts open up again.

The switch and LED are separated, so you could wire it to turn on when pressed or vice versa or whatever you wish! Check the tech details for information!

Para obtener más información, visite la página del producto.
Para ver otros productos en esta categoria:

 »

Otros productos que pueden ser de su interés

Arduino Starter Kit Español Original

99.95€ 82.60€

El Arduino Starter Kit es el kit oficial de Arduino para realizar 15 proyectos de diferentes niveles de dificultad, incluye un manual en español y todos los componentes necesarios. Kit Arduino Original con Manual en ...

Makey Makey Original Classic

49.50€ 46.45€

El Makey Makey es un kit de creación interactiva que convierte prácticamente cualquier objeto común en diferentes teclas táctiles con lo que se puede ...

Cables de Prueba Pinza Cocodrilo 10 Unidades

3.25€

Varios colores. Longitud 30cm. 2 unidades de cada ...

Kit 37 Sensores Arduino

14.50€

Incluye: 1. Módulo Joystick 2. Módulo relé 5V 3. Módulo micrófono pequeño 4. Módulo micrófono grande 5. Módulo seguidor de linea 6. Módulo detector de obstáculos 7. Módulo Sensor de llama 8. ...

Micro:bit V2.2 con BLE 5.0 Micrófono Altavoz y Acelerómetro

16.95€

La BBC micro:bit v2 es una computadora de bolsillo que te permite ser creativo con la tecnología digital. ¡Puedes codificar, personalizar y controlar la micro:bit desde cualquier lugar! Puedes usar tu micro:bit V2 para todo tipo de ...

Kit Micro:bit Go V2 con Portapilas, Pilas y Cable

19.80€

Este kit incluye: Micro:bit V2 Cable USB corto Portapilas para 2 pilas AAA 2 pilas ...

Robot Maqueen con Placa Micro:bit V2 Incluida

54.45€

Incluye La placa Micro:bit V2 y el robot Maqueen El Maqueen es un robot de programación ...

Mapa de Seguimiento para Robot Maqueen

6.75€

Este mapa multifuncional de 120 x 90 cm está especialmente diseñado para aplicaciones de seguimiento de líneas. Hay líneas negras con una anchura de 2 cm impresas en el papel de mapa de 120 g, que es de alta calidad y no es fácil de ...

Copyright © 2006-2024 Electan Electrónica y Robótica
Electan
Tu Tienda Donde Comprar Micro:bit, Maqueen, Arduino y Robotica On Line. Todo lo que necesitas para tus proyectos a un click

Ubicacion: Elche, España

Teléfono: 966 410 250

E-Mail: info@electan.com