Rugged Metal On/Off Switch with Red LED Ring

Referencia: ADFC-916
Fabricante: Adafruit
Disponible: Descatalogado

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a red plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the red LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there's a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA.

This button is an on/off switch button, when you press it the 'normally-open' contact shorts to the common contact and the button stays 'pressed'. When you press it a second time, the button springs open, and the contacts open up again.

The switch and LED are separated, so you could wire it to turn on when pressed or vice versa or whatever you wish! Check the tech details for information!

Para obtener más información, visite la página del producto.
Para ver otros productos en esta categoria:

 »

Otros productos que pueden ser de su interés

Arduino Starter Kit Español Original

99.95€ 82.60€

El Arduino Starter Kit es el kit oficial de Arduino para realizar 15 proyectos de diferentes niveles de dificultad, incluye un manual en español y todos los componentes necesarios. Kit Arduino Original con Manual en ...

Cables de Prueba Pinza Cocodrilo 10 Unidades

3.25€

Varios colores. Longitud 30cm. 2 unidades de cada ...

Kit 37 Sensores Arduino

14.50€

Incluye: 1. Módulo Joystick 2. Módulo relé 5V 3. Módulo micrófono pequeño 4. Módulo micrófono grande 5. Módulo seguidor de linea 6. Módulo detector de obstáculos 7. Módulo Sensor de llama 8. ...

Portapilas AAA con conector para micro:bit

1.90€

Este portapilas esta diseñado específicamente para la placa BBC Micro:bit y tiene un cable de 150mm con el conector ...

Kit Micro:bit Go V2 con Portapilas, Pilas y Cable

19.80€

Este kit incluye: Micro:bit V2 Cable USB corto Portapilas para 2 pilas AAA 2 pilas ...

Robot Maqueen Plus V2 para Micro:bit

49.95€

Este robot es muy accesible para estudiantes de primaria y secundaria. Maqueen Plus V2 no sólo es adecuado para la enseñanza en el aula, sino que también se puede utilizar para ejercicios extraescolares ampliados y competiciones de ...

Cable USB 2.0 Terminales A y Micro B 15 cm Micro:bit

1.25€

Cable USB estándar de 15 cm. de largo. ideal para la placa ...

Mapa de Seguimiento para Robot Maqueen

6.75€

Este mapa multifuncional de 120 x 90 cm está especialmente diseñado para aplicaciones de seguimiento de líneas. Hay líneas negras con una anchura de 2 cm impresas en el papel de mapa de 120 g, que es de alta calidad y no es fácil de ...

Copyright © 2006-2024 Electan Electrónica y Robótica
Electan
Tu Tienda Donde Comprar Micro:bit, Maqueen, Arduino y Robotica On Line. Todo lo que necesitas para tus proyectos a un click

Ubicacion: Elche, España

Teléfono: 966 410 250

E-Mail: info@electan.com