Calliope Mini

Referencia: ADFC-4071
Fabricante: Adafruit
Disponible: Descatalogado

Willkommen, Calliope Mini! Developed in Germany for students in primary school and up, this heavenly star-shaped development board is a souped-up derivative of the micro:bit.

The main chip on the Calliope is the same nRF51822 as the micro:bit so for many purposes, it can be programmed the same way. There are some big upgrades though!

Things that are the same as the micro:bit

  • Nordic nRF51822 Multi-protocol Bluetooth® 4.0 low energy / 2.4GHz RF SoC
    • 32-bit ARM Cortex M0 processor (16MHz)
    • 16kB RAM
    • 256kB Flash
    • Bluetooth low energy
  • 5x5 LED matrix display
  • USB Micro B connection (programming and power supply)
  • JST battery connector (3.3V)
  • 2 programmable buttons
  • PWM outputs
  • NXP KL26z (USB UART and programming interface chip)
  • Serial interface (USB + configurable ports)
  • 4 analog inputs
  • 8-11 Input / Output Connections (depending on software configuration)
  • SPI + I2C

Things that are new or different:

  • Instead edge-connect pads on the bottom of the board, like micro:bit, Calliope Mini's has a circular star design, with alligator pads on 6 corners for easy connection.
  • Full 9 degree of freedom IMU with Accelerometer, Gyroscope, Magnetometer (Bosch BMX055) - the micro:bit has only accelerometer and magenetometer, and they are different/separate chips.
  • MEMS Microphone for audio input
  • DC Motor Driver (TI DRV8837) to drive a single DC motor or solenoid
  • Piezo Speaker
  • RGB LED (WS2812B NeoPixel)
  • 2 x Grove connectors (I2C + serial / analog)

In particular, we think this is a nice upgrade board for when you like micro:bit but want a ton more stuff built in. The Calliope Mini can be programmed through Microsoft MakeCode just like the 'bit, including radio communications and displaying on the 25 LED matrix! It can also run micropython code on the micro:bit - we would recommend using the default micro:bit micropython build and then using the accessories on-board as if they were wired to a 'bit on a breadboard or with alligator clips.

Check out their website for a plethora of classroom-friendly projects and experiments. In just a few clicks, you can transform Calliope Mini into a small robot friend, play musical compositions, send messages, and more. Alles Gute!

Para obtener más información, visite la página del producto.
Para ver otros productos en esta categoria:

 »

Otros productos que pueden ser de su interés

Arduino Starter Kit Español Original

99.95€ 82.60€

El Arduino Starter Kit es el kit oficial de Arduino para realizar 15 proyectos de diferentes niveles de dificultad, incluye un manual en español y todos los componentes necesarios. Kit Arduino Original con Manual en ...

Makey Makey Original Classic

49.50€ 46.45€

El Makey Makey es un kit de creación interactiva que convierte prácticamente cualquier objeto común en diferentes teclas táctiles con lo que se puede ...

Kit 37 Sensores Arduino

14.50€

Incluye: 1. Módulo Joystick 2. Módulo relé 5V 3. Módulo micrófono pequeño 4. Módulo micrófono grande 5. Módulo seguidor de linea 6. Módulo detector de obstáculos 7. Módulo Sensor de llama 8. ...

Portapilas AAA con conector para micro:bit

1.90€

Este portapilas esta diseñado específicamente para la placa BBC Micro:bit y tiene un cable de 150mm con el conector ...

Kit Micro:bit Go V2 con Portapilas, Pilas y Cable

19.80€

Este kit incluye: Micro:bit V2 Cable USB corto Portapilas para 2 pilas AAA 2 pilas ...

Kit Micro:bit V2 con Funda Protectora Cable y Portapilas

23.95€

Incluye: -Micro:bit V2 con BLE 5.0 Micrófono Altavoz y Acelerómetro -Funda Azul para Micro:bit V2 -Portapilas AAA con conector para micro:bit -Cable USB 2.0 Terminales ...

Robot Maqueen Plus V2 para Micro:bit

49.95€

Este robot es muy accesible para estudiantes de primaria y secundaria. Maqueen Plus V2 no sólo es adecuado para la enseñanza en el aula, sino que también se puede utilizar para ejercicios extraescolares ampliados y competiciones de ...

Mapa de Seguimiento para Robot Maqueen

6.75€

Este mapa multifuncional de 120 x 90 cm está especialmente diseñado para aplicaciones de seguimiento de líneas. Hay líneas negras con una anchura de 2 cm impresas en el papel de mapa de 120 g, que es de alta calidad y no es fácil de ...

Copyright © 2006-2024 Electan Electrónica y Robótica
Electan
Tu Tienda Donde Comprar Micro:bit, Maqueen, Arduino y Robotica On Line. Todo lo que necesitas para tus proyectos a un click

Ubicacion: Elche, España

Teléfono: 966 410 250

E-Mail: info@electan.com