5V 1.8A Isolated Output PoE Module Works with Raspberry Pi 3 B+

Referencia: ADFC-3848
Fabricante: Adafruit
Disponible: Descatalogado

Power over Ethernet (PoE) can make your project wiring a breeze - instead of needing a wire for power and data, you can use one Ethernet cable for both! All you need is this handy PoE module, and access to the center-taps on your Ethernet-capable board. Attach the four input wires, and get regulated 5V 1.8A on the other side. Amazing!

This version of the PoE module has a transformer in the center, that's the big chunky thing, so that there is no direct electrical connection between the 5V power/ground and Ethernet cables.

This module works well with the Raspberry Pi 3 Model B+, which has the 4 wires on a header. As you can see in our photos, you just need some female-female jumper wires to get the Ethernet wires to the module, and then two wires to bring the 5V back to the header. Note that even though a 2.5A power supply is recommended for a Pi 3B+, that's only required if you attach a bunch of accessories (such as a 7" display!) 1.8A will cover a wide range of usages, as the current draw is around 0.7A max without extras.

If you don't have access to those pins, but can power your board or computer with a micro USB cable, check out our 5V microUSB PoE Splitter. It's bigger and more expensive but really easy to use Great for older Raspberry Pi's (not the 3 B+), Feathers, etc)

We also have an non-isolated version of this module, when you don't need electrical separation.

Para obtener más información, visite la página del producto.
Para ver otros productos en esta categoria:

 »

Otros productos que pueden ser de su interés

Makey Makey Original Classic

49.50€ 46.45€

El Makey Makey es un kit de creación interactiva que convierte prácticamente cualquier objeto común en diferentes teclas táctiles con lo que se puede ...

Cables de Prueba Pinza Cocodrilo 10 Unidades

3.25€

Varios colores. Longitud 30cm. 2 unidades de cada ...

Kit 37 Sensores Arduino

14.50€

Incluye: 1. Módulo Joystick 2. Módulo relé 5V 3. Módulo micrófono pequeño 4. Módulo micrófono grande 5. Módulo seguidor de linea 6. Módulo detector de obstáculos 7. Módulo Sensor de llama 8. ...

Micro:bit V2.2 con BLE 5.0 Micrófono Altavoz y Acelerómetro

16.95€

La BBC micro:bit v2 es una computadora de bolsillo que te permite ser creativo con la tecnología digital. ¡Puedes codificar, personalizar y controlar la micro:bit desde cualquier lugar! Puedes usar tu micro:bit V2 para todo tipo de ...

Kit Micro:bit Go V2 con Portapilas, Pilas y Cable

19.80€

Este kit incluye: Micro:bit V2 Cable USB corto Portapilas para 2 pilas AAA 2 pilas ...

Robot Maqueen Plus V2 para Micro:bit

49.95€

Este robot es muy accesible para estudiantes de primaria y secundaria. Maqueen Plus V2 no sólo es adecuado para la enseñanza en el aula, sino que también se puede utilizar para ejercicios extraescolares ampliados y competiciones de ...

Mapa de Seguimiento para Robot Maqueen

6.75€

Este mapa multifuncional de 120 x 90 cm está especialmente diseñado para aplicaciones de seguimiento de líneas. Hay líneas negras con una anchura de 2 cm impresas en el papel de mapa de 120 g, que es de alta calidad y no es fácil de ...

Copyright © 2006-2024 Electan Electrónica y Robótica
Electan
Tu Tienda Donde Comprar Micro:bit, Maqueen, Arduino y Robotica On Line. Todo lo que necesitas para tus proyectos a un click

Ubicacion: Elche, España

Teléfono: 966 410 250

E-Mail: info@electan.com