SparkFun FT231X Breakout

12.15€ 14.70€ VAT included
Rated 0/5 (0 Votes!)
Model: SPRK-BOB-13263
Manufacturer: Sparkfun
Sparkfun
In Stock Available for immediate delivery

Introducing the 3.3V SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pin-out of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications.

This board still brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto-reset any Arduino board that has the reset pin brought out to a 6-pin connector.

The coolest thing about the FT231X Breakout is that we have broken out ALL the pins for your use, making this board all the more hackable! It also uses a common microUSB jack.

One of the features of this board is a jumper on the back, which allows the VCC output to be configured to either 3.3V or 5V. This board ships default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V. It should be noted that the max input of the FT231X is only 3.3V, but it can operate down to 1.8V with external pull-ups and is also 5V tolerant.

Documents:

For more information, please visit this products webpage.
More products in this category:
Customers who bought this product also purchased
Arduino DUE with ARM Cortex M3
The Arduino Due has a 32-bit Atmel SAM3X8E ARM Cortex M3 CPU. The main features are: - A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. - CPU Clock at 84Mhz. - 96 KBytes of ...
34.75€
Arduino MEGA with Atmega2560
The new Arduino Mega is using an ATMEGA2560 processor. 256KB of Flash 8KB RAM 4KB EEPROM It has 53 IO (including 4 HW UARTs, 14 PWMs, I2C bus) and 16 Analog Input pins. It can mount and use most of the ...
34.50€ 27.75€
Serial Bluetooth Grove
This Grove - BLE utilizes an HM-11 module to provide your Arduino/Seeeduino with serial BLE function, and it can be used with Arduino/Seeeduino very conveniently if using with Base Shield together. With support for a BLE ComAssistant APK, ...
30.50€
Adafruit Data Logging Shield for Arduino
Here's a handy Arduino shield: we've had a lot of people looking for a dedicated and well-designed data logging shield. We worked hard to engineer an inexpensive but well-rounded design. Not only is it easy to assemble and customize, it ...
24.05€
Arduino M0 Zero
The Arduino M0 represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex M0 core. With the addition of the M0 board, the Arduino family ...
23.95€ 16.77€
Grove Serial LCD 16x2 RGB Backlight
This consists of two parts, a module holding an 16 character by 2 line LCD, and the twig itself(most may receive the two-units-soldered together-version). The LCD has an interface that is easily used under the Arduino IDE using the special ...
21.28€
37 in 1 Sensor Kit for Arduino
This kit includes 37 sensors for Arduino projects. 1. Joystick Module 2. Relay Module 3. Small Microphone Module 4. Large Microphone Module 5. Line Tracking Sensor 6. Obstatche Avoidance Sensor 7. ...
19.75€
Europe Official Distributor
Adafruit
Pololu
Sparkfun
Makey makey
Lilypad
Arduino

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice