RPLIDAR A3M1 360 Laser Range Scanner

924.93 1,119.17 VAT included
Rated 0/5 (0 Votes!)
Model: SPRKC-SEN-15045
Manufacturer: Sparkfun
Sparkfun

The RPLIDAR A3M1 is the next generation of 360 degree 2D LIDARs. Each RPLIDAR A3 can take up to 16000 samples of laser ranging per second thanks to its high rotation speed. The on-board system can perform 2D 360 scans within a range of 25 meters in enhanced mode and 20 meters in outdoor mode. Additionally, the generated 2D point cloud data can be used in mapping, localization, and object/environment modeling!

The RPLIDAR A3M1 consists of a long range scanner core and mechanical powering parts which makes the core rotate at a high speed. When it functions normally, the scanner will rotate and scan clockwise allowing you to be able to get the range scan data via the communication interface of the RPLIDAR and control the start, stop and rotating speed of the rotation motor via PWM. The typical scanning frequency of the RPLIDAR A3 360 Laser Scanner is 10hz (600rpm) with a scanning frequency that can be freely adjusted within the 5-20Hz range according to the requirements of what you need.

What makes the A3M1 special is its ability to switch between two different modes of operation (mentioned earlier): enhanced mode and outdoor mode. In enhanced mode, the RPLIDAR works within the maximum ranging radius and sampling rate to for optimum mapping performance in indoor environments. While in the outdoor mode, the RPLIDAR A3M1 works with a more reliable resistance to daylight interference, which prevents it from being ?blinded? in outdoor environments.

Thanks to the improvements in SLAMTEC hardware operating performance and related algorithm, RPLIDAR A3M1 works well in all kinds of indoor environment and outdoor environment with direct sunlight. Also, before leaving the factory, every RPLIDAR A3 has passed strict testing to ensure the laser output power meet the eye safety standards of IEC-60825 Class I.

Includes:

  • 1x RPLIDAR A3M1
  • 1x USB Adapter
  • 1x micro-USB Cable
  • 1x Power Adapter

Features:

  • Max Distance Range:
    • Enhanced Mode: 25m
    • Outdoor Mode: 20m
  • Angular Resolution:
    • Enhanced Mode: 0.3375
    • Outdoor Mode: 0.54
  • Sample Rate:
    • Enhanced Mode: 16000 per second
    • Outdoor Mode: 10000 per second
  • Scan Rate Typical Value: 15 Hz (adjustable between 5Hz-20Hz)
  • Communication Speed: 256000bps
  • Communication Interface: TTL UART

Documents:

Videos

For more information, please visit this products webpage.
More products in this category:

Buy Sparkfun On Demand »

More Featured Products
Arduino UNO Rev3 Original with ATMega328
Arduino is an open-source physical computing platform based on a simple i/o board and a user friendly development environment that implements the Processing/Wiring language. Arduino UNO is the enhanced release of Duemilia ...
22.45 18.95
NodeMCU V3 IOT ESP8266 development kit
The NodeMcu is an open-source firmware and development kit that helps you to Prototype your IOT product within a few Lua script lines. Features: Open-source Interactive Programmable Low ...
5.75
LilyPad Arduino 328 Main Board
The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, ...
15.19
Breadboard White Self-Adhesive
Dimensions: 8.2x5.5cm Self-adhesive on the ...
5.49
Triple Axis Accelerometer and Gyro Breakout MPU6050A
The MPU-6050A combine a 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor (DMP) Features: -I2C Digital-output of 6 or 9-axis MotionFusion data in rotation ...
6.25
Lithium Ion polymer Batteries 6A
This is a light weight, high energy density Lithium Ion polymer battery. It outputs a nominal 3.7v at 6000mAh, comes terminated with a standard 2-pin JST connector- 2mm spacing between pins. Features: Excellent long-term ...
22.95
Pressure-Sensitive Conductive Sheet (Velostat/Linqstat)
This conductive material (also known as "Velostat" or "Linqstat") is a nice addition for your wearable/sensor hacking toolkit. It's pressure-sensitive: squeezing it will reduce the resistance, so it's handy for making flexible sensors. ...
4.96
Europe Official Distributor
Adafruit
Pololu
Sparkfun
Makey makey
Lilypad
Arduino
Categories
Manufacturers
Best Sellers
Producto
SPRKC-DEV-15583
Teensy 4.0

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice