Robotics Accessories

Displaying 1 to 52 (of 52 products)
VAT not included
7.95€
This is a light weight, high energy density Lithium Ion polymer battery. It outputs a nominal 3.7v at 1000mAh, comes terminated with a ...
DFR-SER0006
4.70€
This is the most mini servo. Only weights 9 gram and gives you a 1.6kg.cm torque. Pretty strong regarding its size. General ...
1.80€
This ball caster kit includes a black ABS housing, a 3/8" diameter plastic ball, two spacers (1/16" and 1/8" thick), and two #2 screw ...
11.75€
This continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. It can be controlled directly by ...
4.95€
Motor supply: 7 to 24 VDC Control Logic: Standard TTL Logic Level Output Power: Up to 2 A each Enable and Direction Control ...
10.95€
Infrared proximity sensor made by Sharp. Part # GP2Y0A21YK has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm. The sensor ...
5.49€
The RW2i rubber wheel features an internal set screw ideal for designs with space constraints. The 1.23-inch diameter wheel by Solarbotics ...
4.85€
- Motor voltage: 4.5-13.5V - Logic voltage: 2.7-5.5V - Output current: 1 A continuous (3 A peak) per motor - Motor outputs ...
4.50€
To use with PL-MMG series Mini Metal Gearmotors Shaft diameter: 3 mm (D shape)
4.60€
Features: - 60 pieces - Motor gear x 8 - Spindle gear x 10 - Double gear x 12 - Pulleys x 7 - Crown Gears x 9
5.36€
The A4988 stepper motor driver carrier is a breakout board for Allegro’s easy-to-use A4988 microstepping bipolar stepper motor ...
9.41€
Includes axis of 125 mm and diameter 3 mm, that can be cut to the wished length. The C-6084 is an assortment of gears of module ...
8.48€
The HD-1160A a great general-purpose actuator for small mechanisms that require a bit more torque than you can get out of micro and ...
2.18€
Motor Voltage: 2.5 - 12V Motor channels: 2 Max Continuous Current per Channel: 800mA Size: 31mm x 22mm x 12mm
9.01€
This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following ...
5.54€
TCRT5000 IR reflective sensor Power supply: 3.3V-5V Measuring range: Adjustable, range from 1mm to 8mm Output: ...
6.29€
This ball caster uses a 1" diameter plastic ball and has an overall height of 1.1" (29 mm). The two-part housing snaps together to ...
8.78€
Includes axis of 125 mm and diameter 3 mm, that can be cut to the wished length. The C-6085 is an assortment of gears of module 0.5 and ...
5.32€
Gear Ratio: 1:120 Size: 69 x 37 x 23 mm. Weight: 30g Wheel: diam. 65 x 25mm 50 rpm/min @3VDC Torgue: 0.8kg-cm
6.43€
This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and ...
6.95€
These versatile black plastic wheels have silicone tires and measure 80 mm (3.15") in diameter. What makes them special is the included ...
10.81€
Input voltage: 1.5 V to 16 V
Output adjustable from 4 V to 25 V ...
7.46€
This small synchronous switching step-down (or buck) regulator takes an input voltage from 4 V to 36 V and efficiently reduces it to 3.3 V. ...
9.13€
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V.  ...
12.69€
Mixed caterpillars set. Drive wheels and axis are included
10.81€
This powerful, adjustable boost regulator can generate an output voltage as high as 9.5 V from an input voltage as low as 1.5 V, all in a ...
22.57€
Allows to easily drive two small, brushed DC motors with full direction and speed control ...
6.32€
To use with PL-MMG series Mini Metal Gearmotors Shaft diameter: 3 mm (D shape)
13.29€
This powerful step-up/step-down regulator efficiently produces an adjustable 4 V to 12 V output from input voltages between 3 V and 30 V ...
9.95€
Includes axis of 125 mm and diameter 3 mm, that can be cut to the wished length. Contains a mixed wheels set made of synthetic rubber, ...
3.70€
This adorable little board will come in very handy whenever you need a small amount of 5V power. It's the size of a linear regulator, ...
8.95€
If you need to charge LiPo batteries, this simple charger will do just that. It is designed to charge single-cell Li-Ion or Li-Polymer ...
14.22€
Includes axis of 125 mm and diameter 3 mm, that can be cut to the wished length. Pulleys Width: 10 mm.
SEE-105020001
15.75€
7.96€
Operating voltage: 0.8 V to 5.0 V
5.0 V output with 2.5% accuracy ...
6.36€
This ball caster uses a 1" diameter plastic ball and has an overall height of 1.1" (29 mm). The two-part housing snaps together to ...
7.96€
- Operating voltage: 2.7-10.8 V - Output current: 1.2 A continuous (2 A peak) per motor - Motor outputs can be paralleled to ...
22.68€
This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly ...
13.02€
This Standard Servo is the higher-torque option providing 56 oz-in at a speed of 0.18 seconds per 60 degrees of motion at 6 ...
6.45€
USB-Micro USB 30cm cable included 2600mAh Output voltage: 5Vcc/1000mAh Ion-Litium Weight: 74,0gr Size: 24,0x2
SPRK-ROB-10335
6.10€
Description: This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pa
7.19€
This chassis base plate is a round piece with cutouts for building a differential-drive robot ...
11.44€
Each EasyDriver can drive up to about 750mA per phase of a bi-polar stepper motor. It is permanently set to use 8 step microstepping mode. ...
9.01€
This switching regulator uses the SEPIC topology to provide a regulated output voltage that can be higher than, the same as, or lower than ...

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice