Polymorph - 1000g

31.77€ 38.44€ VAT included
Rated 0/5 (0 Votes!)
Model: SPRKC-TOL-10951
Manufacturer: Sparkfun
Sparkfun

Description: Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simply heating the plastic beads in hot water until they turn clear and then kneading them together and shaping by hand. When it cools it becomes a nylon-like white plastic. Polymorph can be re-used by simply re-heating and re-shaping. Plastic beads are supplied in a re-usable plastic container.

So what do you do with it? Robotics, small-parts prototyping, arts/crafts, there's almost no end to what you can do with this stuff. We had a blast playing with it here at SparkFun. Try embedding LEDs into it for a cool diffuse glow effect.

Note: This no longer comes in the plastic containers, sorry!  We will update the pictures.

Note: Although Polymorph melts at around 60°C (140°F), it is more workable at hotter temperatures around 180-200°F.

Weight: 1000g

Features:

  • Non-toxic, biodegradable polyester
  • Low melting temperature of about 60°C (140°F)
  • Useful for many type of robots
  • Can be melted and re-used over and over
  • Supplied in a re-usable plastic container

Documents:

For more information, please visit this products webpage.
More products in this category:

Buy Hand Tools »

More Featured Products
Arduino MEGA with Atmega2560
The new Arduino Mega is using an ATMEGA2560 processor. 256KB of Flash 8KB RAM 4KB EEPROM It has 53 IO (including 4 HW UARTs, 14 PWMs, I2C bus) and 16 Analog Input pins. It can mount and use most of the ...
34.50€ 27.75€
Vacuum Pump - 12V
Description: This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. We even used one to make our very own ...
16.78€
QTR-8A Reflectance Sensor Array
This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pairs of LEDs are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be ...
9.01€
40 Pin Male-Male Splittable Jumper Wire 200mm
This is a splittable 40 pin 200mm length jumper wire for ...
3.34€
Magnetic Encoder Pair Kit for Micro Metal Gearmotors 12 CPR 2.7-
Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from ...
8.09€
VL53L1X Time-of-Flight Distance Sensor Carrier with Voltage Regu
This sensor is a carrier/breakout board for ST’s VL53L1X laser-ranging sensor, which offers fast and accurate ranging up to 4 m. It uses the time of flight (ToF) of invisible, eye-safe laser pulses to measure absolute distances ...
12.90€

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice