Pololu

Displaying 1 to 72 (of 72 products)
VAT not included
6.07
The FS90R is a micro servo that has been built by FEETECH (formerly known as Fitec) specifically for continuous rotation, offering an ...
1.80
This ball caster kit includes a black ABS housing, a 3/8" diameter plastic ball, two spacers (1/16" and 1/8" thick), and two #2 screw ...
4.50
To use with Micro Metal Gearmotor series POL-MMG ...
24.96
This shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. Its dual MC33926 motor drivers ...
15.79
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 100.37:1 metal gearbox. It has a cross ...
7.96
- Operating voltage: 2.7-10.8 V - Output current: 1.2 A continuous (2 A peak) per motor - Motor outputs can be paralleled to ...
12.90
This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. ...
8.09
Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and ...
4.50
To use with PL-MMG series Mini Metal Gearmotors Shaft diameter: 3 mm (D shape)
14.43
Key specs at 6 V: 3000 RPM and 120 mA free-run, 4 oz-in and 1.6 A stall.
5.36
The A4988 stepper motor driver carrier is a breakout board for Allegro’s easy-to-use A4988 microstepping bipolar stepper motor ...
11.75
This continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. It can be controlled directly by ...
14.43
Key specs at 6 V: 320 RPM and 80 mA free-run, 30 oz-in (2.2 kg-cm) and 1.6 A stall.
14.43
Key specs at 6 V: 120 RPM and 70 mA free-run, 75 oz-in and 1.6 A stall.
9.65
This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and ...
8.09
This board is a simple carrier of Allegro’s +/-30A ACS714 Hall effect-based linear current sensor. This version accepts a ...
6.95
These versatile black plastic wheels have silicone tires and measure 80 mm (3.15\") in diameter. What makes them special is the included ...
6.29
This ball caster uses a 1" diameter plastic ball and has an overall height of 1.1" (29 mm). The two-part housing snaps together to ...
14.43
Key specs at 6 V: 50 RPM and 30 mA free-run, 22 oz-in (1.6 kg-cm) and 0.36 A stall ...
5.39
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 3 mm diameter motor shafts. The set includes two ...
7.19
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 6 mm diameter motor shafts. The set includes two ...
9.01
This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following ...
4.85
- Motor voltage: 4.5-13.5V - Logic voltage: 2.7-5.5V - Output current: 1 A continuous (3 A peak) per motor - Motor outputs ...
4.96
This small digital distance sensor detects objects between 2 and 10 cm (0.8" and 4") away. With its quick response time, small size, and ...
11.31
Includes five each of ten different colors ...
6.29
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 4 mm diameter motor shafts. The set includes two ...
6.55
These aluminum gearmotor brackets let you mount Pololu’s 37D mm metal gearmotors to your project. The brackets are sold in pairs, and each ...
9.13
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The ...
13.02
This Standard Servo is the higher-torque option providing 56 oz-in at a speed of 0.18 seconds per 60 degrees of motion at 6 ...
9.13
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V.  ...
41.63
Get your Arduino moving! This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its ...
4.50
This compact bracket enables convenient mounting of popular, Sanyo-style miniature metal gearmotors. The black plastic bracket encloses ...
10.81
Input voltage: 1.5 V to 16 V
Output adjustable from 4 V to 25 V ...
17.45
The Pololu Zumo chassis is a small, tracked robot platform that is less than 10 cm on each side, allowing it to qualify for Mini Sumo ...
61.28€ 49.02
Battery holder and two brushed DC motors included ...
14.43
Key specs at 6 V: 120 RPM and 40 mA free-run, 10 oz-in (0.7 kg-cm) and 0.36 A stall ...
20.79
This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly ...
18.05
The Pololu Wixel is a general-purpose programmable module featuring a 2.4 GHz radio and USB. You can write your own software or load ...
66.04
Build your very own programmable balancing robot with the Balboa 32U4 robot kit! The Balboa control board features an Arduino-compatible ...
13.45
This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, low-current motor with 50:1 metal gearbox, similar to Sanyo’s popular ...
90.45€ 79.90
Compatible with the popular Arduino development platform ...
33.29
This gearmotor is a powerful 12V brushed DC motor with a 70:1 metal gearbox and an integrated quadrature encoder that provides a resolution ...
6.32
To use with PL-MMG series Mini Metal Gearmotors Shaft diameter: 3 mm (D shape)
1.58
Battery holder for six AA batteries.
6.36
This ball caster uses a 1" diameter plastic ball and has an overall height of 1.1" (29 mm). The two-part housing snaps together to ...
5.20
This printed circuit board is designed for building your own circuits based on Microchip Technology’s line of 8-pin PIC microcontrollers. ...
7.19
This chassis base plate is a round piece with cutouts for building a differential-drive robot ...
13.45
This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, low-current motor with 298:1 metal gearbox, similar to Sanyo’s popular ...
6.36
This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features ...
67.01
The mbed is an easy-to-use MCU development board designed for rapid prototyping. At its heart is a powerful 32-bit ARM Cortex-M3 ...
31.63
The versatile Romi chassis is a great starting point for your next mobile robot. This kit includes all the basic mechanical parts to get ...
13.29
This powerful step-up/step-down regulator efficiently produces an adjustable 4 V to 12 V output from input voltages between 3 V and 30 V ...
8.48
The HD-1160A a great general-purpose actuator for small mechanisms that require a bit more torque than you can get out of micro and ...
9.01
This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot.  ...
22.57
Allows to easily drive two small, brushed DC motors with full direction and speed control ...
7.46
This small synchronous switching step-down (or buck) regulator takes an input voltage from 4 V to 36 V and efficiently reduces it to 3.3 V. ...
13.45
Key specs at 6 V: 1300 RPM and 40 mA free-run, 2 oz-in (0.2 kg-cm) and 0.36 A stall ...
13.45
This gearmotor is a miniature (0.94" x 0.39" x 0.47"), low-current brushed DC motor with 30:1 metal gearbox, similar to Sanyo’s popular ...
22.86
Steps per revolution: 200 Current rating per coil: 670 mA Voltage rating: 4.5 V Holding torque: 950 g-cm 13 oz·in Resist
9.01
This switching regulator uses the SEPIC topology to provide a regulated output voltage that can be higher than, the same as, or lower than ...
14.43
Key specs at 6V: 625 RPM and 100 mA free-run, 15 oz-in (1.1 kg-cm) and 1.6 A stall.
7.96
Operating voltage: 0.8 V to 5.0 V
5.0 V output with 2.5% accuracy ...
6.77
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 5 mm diameter motor shafts. The set includes two ...
13.45
This gearmotor is a miniature (0.94" x 0.39" x 0.47"), low-current brushed DC motor with 5:1 metal gearbox, similar to Sanyo’s popular ...
7.96
This coated steel bracket lets you securely mount typical NEMA 23-size stepper motors to your project. The bracket features two slots for ...
10.81
This powerful, adjustable boost regulator can generate an output voltage as high as 9.5 V from an input voltage as low as 1.5 V, all in a ...

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice