Motor Drivers

Displaying 1 to 27 (of 27 products)
VAT not included
1.81€
The ULN2003 Darlington Array is used to drive 4-phase 5-wire stepper motors (5-12v)
4.95€
Motor supply: 7 to 24 VDC Control Logic: Standard TTL Logic Level Output Power: Up to 2 A each Enable and Direction Control ...
2.75€
This high-power electronic voltage regulator can be used to adjust the speed in AC motors, light and other resistive loads. Not suitable ...
4.85€
- Motor voltage: 4.5-13.5V - Logic voltage: 2.7-5.5V - Output current: 1 A continuous (3 A peak) per motor - Motor outputs ...
5.36€
The A4988 stepper motor driver carrier is a breakout board for Allegro’s easy-to-use A4988 microstepping bipolar stepper motor ...
18.90€
This Arduino Motor shield uses L298P chip which allow to drive two 7-12V DC motors with maximum 2A current. This shield can be directly ...
SPRK-ROB-12859
18.31€
The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar
2.18€
Motor Voltage: 2.5 - 12V Motor channels: 2 Max Continuous Current per Channel: 800mA Size: 31mm x 22mm x 12mm
24.96€
This shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. Its dual MC33926 motor drivers ...
6.43€
This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and ...
9.75€
This Pulse Width Modulation Module can be used to adjust the duty of PWM range from 10% to 100%. The max. output current can be up to 10A ...
BSC-SERVOCON
4.95€
With this module, you can easily control your servo manually. 2 servos can be controlled or tested at the same time. Supply ...
9.65€
This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and ...
15.63€
You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to ...
24.05€
The original Adafruit Motorshield kit is one of our most beloved kits, which is why we decided to make something even better. We have ...
21.50€
Double H driver module uses ST L298N dual full-bridge driver, an integrated monolithic circuit in a 15- lead Multiwatt and PowerSO20 ...
22.80€
TB6600 arduino is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with ...
11.44€
Each EasyDriver can drive up to about 750mA per phase of a bi-polar stepper motor. It is permanently set to use 8 step microstepping mode. ...
SEE-105020001
15.75€
22.57€
Allows to easily drive two small, brushed DC motors with full direction and speed control ...
7.96€
- Operating voltage: 2.7-10.8 V - Output current: 1.2 A continuous (2 A peak) per motor - Motor outputs can be paralleled to ...
22.88€
This Arduino Motor shield uses L298P chip which allow to drive two DC motors with maximum 2A current each.
41.63€
Get your Arduino moving! This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its ...
65.41€
This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge ...

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice