MI:pro Mountable Case for micro:bit

6.51€ 7.88€ VAT included
Rated 0/5 (0 Votes!)
Model: SPRKC-PRT-14335
Manufacturer: Sparkfun
Sparkfun

The Mountable MI:pro is a simple and compact protective case for the micro:bit. These cases feature a three-layer construction style with ability to wall-mount the whole assembly onto any surface you want while still providing access to all buttons and ports on the micro:bit. Though these cases do feature wall-mountable tabs, the biggest benefit of using a case is to not accidentally short out the pads on the back of the micro:bit.

Construction is simple, requiring only a small flathead screwdriver, and involves layering each plate on top of one another around the micro:bit and screwing it into place. Luckily, the MI:pro case enables easy access to the edge pins at the bottom of the micro:bit, allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI:pro case is the SparkFun gamer:bit due to its edge connector being located in the center of the board.

Note: The MI:pro case only includes the parts found in the Includes Tab. This case does NOT include a micro:bit, power source or mounting screws. These items will need to be purchased separately.

Includes:

  • 1x Front Plate
  • 1x Back Mounting Plate
  • 2x Mid-layer Plate
  • 4x M3 Nylon Machine Screw
  • 4x M3 Nylon Full Nut

Documents:

Videos

For more information, please visit this products webpage.
More products in this category:

Buy Sparkfun On Demand »

More Featured Products
Arduino Starter Kit Spanish Edition
Oficial Arduino Kit with 15 projects of different complexity. 1 Arduino Projects Book Spanish Edition (170 pages) 1 Arduino UNO board rev 3 1 USB cable 1 Breadboard 1 Easy-to-assemble wooden base 1 9v ...
82.60€ 65.08€
Arduino MEGA with Atmega2560
The new Arduino Mega is using an ATMEGA2560 processor. 256KB of Flash 8KB RAM 4KB EEPROM It has 53 IO (including 4 HW UARTs, 14 PWMs, I2C bus) and 16 Analog Input pins. It can mount and use most of the ...
34.50€
Infrared Proximity Sensor Sharp GP2Y0A21YK
Infrared proximity sensor made by Sharp. Part # GP2Y0A21YK has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below ...
9.70€
Alligator Clip Test Cables 10 Units
These are standard alligator to alligator (crocodile) clip test cables. The alligator clip allow you attach the test point without hold the cables which is really handy. The clip is strong and grippy. Length: ...
4.35€
LilyPad Arduino USB - ATmega32U4 Board
The LilyPad Simple just got a whole lot… simpler. We’ve updated the Simple board to create the LilyPad USB by replacing the classic ATMega328 with the new ATMega32U4. Not only does that mean that it’s running a variation of the latest ...
24.71€
Triple Axis Accelerometer and Gyro Breakout MPU6050A
The MPU-6050A combine a 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor (DMP) Features: -I2C Digital-output of 6 or 9-axis MotionFusion data in rotation ...
6.25€
Teensy 4.0
Teensy 4.0 is the latest Teensy, offering the fastest microcontroller and powerful peripherals in the Teensy 1.4 by 0.7 inch form factor. It features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest ...
23.79€
Europe Official Distributor
Adafruit
Pololu
Sparkfun
Makey makey
Lilypad
Arduino

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice