High Precision Temperature Sensor - TMP117 (Qwiic)

18.43 22.30€ VAT included
Rated 0/5 (0 Votes!)
Model: SPRKC-SPX-15413
Manufacturer: Sparkfun
Sparkfun

The TMP117AIDRVT is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of +/- 0.1°C across the temperature range of -20°C to +50°Cs with no calibration. The sensors maximum range is from -55°C to 150°C. It also has a very low power consumption which minimizes the impact of self-heating on measurement accuracy. The sensor operates from 1.8V to 5.5V.

The sensor also includes programmable temperature limits, and digital offset for system correction. The TMP117 sensor is medical grade, meeting ASTM E1112 and ISO 80601-2-56 with NIST traceability.

While the TMP102 is capable of reading temperatures to a resolution of 0.0625°C and is accurate up to 0.5°C, the TMP117 is not only more precise but has a 16-bit resolution of .0078°C.

We've written an Arduino library to help you get started quickly. You can download the library through the Arduino library manager by searching 'SparkFun TMP117' or you can get the GitHub repo as a .zip file and install the library from there.

This board is one of our many Qwiic compatible boards! Simply plug and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required!

We do not plan to regularly produce SparkX products so get them while they?re hot!

Experimental Product: SparkX products are rapidly produced to bring you the most cutting edge technology as it becomes available. These products are tested but come with no guarantees. Live technical support is not available for SparkX products. Head on over to our forum for support or to ask a question.

Documents:

  • TMP117 Datasheet
  • Arduino Library can be obtained through the Arduino library manager by searching 'SparkFun TMP117'
  • Example sketches are included in the library to get you up and running quickly!
  • Eagle Files
  • Schematic
  • Library Repo
  • Please visit the repo for the latest hardware designs.
For more information, please visit this products webpage.
More products in this category:

Buy Sparkfun On Demand »

More Featured Products
Arduino UNO Rev3 Original with ATMega328
Arduino is an open-source physical computing platform based on a simple i/o board and a user friendly development environment that implements the Processing/Wiring language. Arduino UNO is the enhanced release of Duemilia ...
22.45€ 18.95€
Conductive Thread - 60g (Stainless Steel)
Description: This is about 360 yards of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to connect various electronics onto clothing projects. This large spool ...
52.52€
Teensy 3.6
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.6 comes pre-flashed with a bootloader so you can program it using the onboard USB connection; no external programmer ...
32.70€
Conductive Thread Bobbin - 12m (Smooth, Stainless Steel)
This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the ...
5.14€
LilyPad Coin Cell Battery Holder - Switched - 20mm
Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be ...
2.23€
Arduino Shield Ethernet W5100
The Arduino Ethernet shield allows an Arduino board to connect to a LAN. Includes Micro-SD ...
14.33€
Raspberry Pi 3 Model B+ 2018 WiFi Bluetooth
New RaspberryPi 3 Model B+ 2018 with ARM11 Cortex-A53 64-bit 1,4 GHz This board have the same form factor as Raspberry Pi Model B+. - ARM 11 Cortex-A53 64 bits 1,4 GHz BCM2837 - 1GB LPDDR2 SDRAM - WiFi 802.11 ...
46.95€
Pressure-Sensitive Conductive Sheet (Velostat/Linqstat)
This conductive material (also known as "Velostat" or "Linqstat") is a nice addition for your wearable/sensor hacking toolkit. It's pressure-sensitive: squeezing it will reduce the resistance, so it's handy for making flexible sensors. ...
4.96€
Europe Official Distributor
Adafruit
Pololu
Sparkfun
Makey makey
Lilypad
Arduino

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice