Chip Quik Conductive Paint Kit with Plunger and Tips - 5 Grams

21.27 25.74€ VAT included
Rated 0/5 (0 Votes!)
Model: ADFC-3469
Manufacturer: Adafruit
Adafruit

We love non-standard conductive materials here at Adafruit, and now we have a metal-based conductive paint for your crafting needs. This silver/tin/copper based conductive paint is usually used to repair flex circuits or maybe fill in gaps in EMF shielding. But you can use it on paper, plastic, fabric, etc. to create a low-resistance conductive connection.

The Chipquik Conductive Paint 5cc Syringe provides low resistance, metal-based conductive paint in 5g syringe with a plunger & two tips. It can be applied by dispensing, paint brush, or with stencil and squeegee.

Compared to carbon-based conductive paints like Bare Conductive, metal-based paints have lower resistance so you can pass more current through them. They also tend to crack less when bent or flexed. But, they are more expensive.

  • Drying Time:
    • Allow 60-120 minutes for paint to dry before using circuit. Resistance will drop from a few Mega Ohms at 0 minutes to approximately 3 ohms per inch of trace after 120 minutes.
  • Packaging: 5cc/5g Syringe
  • Shelf Life: >12 months
  • Cleaning: Clean using water or isopropyl alcohol (IPA).
  • Storage and Handling:
    • Store at 3-25C (37-77F). Do not freeze.

For more information, please visit this products webpage.
More products in this category:
Europe Official Distributor
Adafruit
Pololu
Sparkfun
Makey makey
Lilypad
Arduino
Seeedstudio
Qwiic

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice