Electronic Brick Arduino

Displaying 1 to 58 (of 58 products)
VAT not included
10.95€
As an extension board, the grove shield for micro:bit integrated 4 grove connectors on board and reserves extra 4 pin outs if users need ...
15.75€
This consists of two parts, a module holding an 16 character by 2 line LCD, and the twig itself(most may receive the two-units-soldered ...
SEE-113020007
24.75€
This Grove - BLE utilizes an HM-11 module to provide your Arduino/Seeeduino with serial BLE function, and it can be used with ...
42.75€
Grove is a modular electronic platform for quick prototyping. Every module has one function, such as touch sensing, creating audio effect ...
3.40€
This brick is based on a poteniometer, rotary angle from 0-300 degree. Cable included
SEE-103030000
11.75€
As an expansion board, Base Shield v2 has many Grove connectors, making it convenient for you to use Grove products together. And It is ...
SEE-101020003
2.25€
Cable included
SEE-101020078
15.14€
Cable included
9.00€
This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity ...
SEE-101020023
7.46€
The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect ...
SEE-101020045
10.97€
This gas sensor detects: Carbon Monoxide, Coal Gas, Liquefied Gas Cable included
9.87€
This Piezo Vibration Sensor is suitable for measurements of flexibility, vibration, impact and touch. The module is based on PZT film ...
23.04€
3-Axis Compass module, a member of twig family uses I2C based Honeywell HMC5883 digital compass. This ASIC is equipped with high ...
SEE-101020008
7.46€
This Moisture Sensor can be used to detect the moisture of soil or judge if there is water around the sensor, let the plants in your garden ...
4.39€
This cable is designed for Electronic Bricks Long. 20cm.
10.53€
The Grove - Gas Sensor MQ2 module is useful for gas leakage detecting. It can detect LPG, i-butane, methane, alcohol, Hydrogen, somke ...
SEE-101020035
2.85€
This protoshield allows you to add your own circuitry or components to your Grove system prototypes. This allows you access to all four ...
24.75€
The Arduino MKR connector carrier is the perfect companion for Arduino MKR boards and a Grove ecosystem. Do you have several ...
4.39€
Vibrator Grove is consist one coin type motor which is a Permanent Magnet coreless DC motor. It vibrates when the input is logic HIGH. It ...
SEE-101020016
5.92€
Cable included
SEE-101020027
7.25€
This brick includes a TA12-200 current transformator. Use it for detecting through current and calculate total power consumption. Maxim
SEE-101020192
32.69€
The module provides precise measurement of barometric pressure and temperature in the environment. The air pressure can be measured in a ...
SEE-104030003
9.00€
In this Grove gadget, we utilize a TM1637 to scale down the controlling pins into 2 Grove pins. It only takes 2 digital pins of Arduino to ...
SEE-101020044
12.07€
Alcohol sensor is semiconductor sensor for alcohol detection. It has good sensitivity and fast response to alcohol, suitable for portable ...
24.95€
Serial RF Pro is a low cost, high performance transparent FSK transceiver with operating at 433/470/868/915 MHz. It features small size, ...
SEE-101020018
4.39€
This water sensor module is part of the Twig system. This sensor works by having a series of exposed traces connected to ground and ...
15.14€
Cable included
13.60€
This is a simple to use PIR motion sensor with Grove compatible interface. Simply connect it to Stem shield and program it, when anyone ...
SEE-101020083
20.84€
The sensor on Grove - Gesture is PAJ7620U2 that integrates gesture recognition function with general I2C interface into a single chip. It ...
SEE-101020050
30.50€
3-axis Gyro module based on ITG 3200. It is the world’s first single-chip, digital-output, 3-axis MEMS motion processing gyro optimized for ...
5.92€
This cable is designed for Electronic Bricks Length: 50cm.
SEE-103020007
4.39€
Cable included
4.39€
A temperature sensor based on thermistor. Can be used to detecting environment temperature. Cable included
4.39€
Cable included
9.00€
This slide potentiometer is a linear variable resistor with a total resistance of 10k. When you move the lever from one side to the ...
SEE-103020006
4.39€
I2C Hub Grove is an extension Grove module for connecting multiply I2C devices to Grove Base Shield.
3.75€
Cable included
SEE-101020046
9.00€
Cable included
SEE-105020001
15.75€
2.95€
This cable is designed for Electronic Bricks
5.92€
Some customer complain that can not use Arduino to control Grove modules directly. So we make this Grove to 4 Pin 2.54 female jumper wire. ...
15.14€
This 3-axis Accelerometer module is based on MMA7660FC with Digital Output I2C. Can be used for sensing data changes, product orientation, ...
13.95€
This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity ...
21.72€
Mega Grove Shield is an extension board for Arduino Mega which allows to connect the Grove modules.
5.92€
This is a simple touch sensor brick, it used TTP223 touch detector IC, you can use this brick to replace the traditional physical push ...
7.85€
This is a electronic brick compatible line find sensor. It is designed for line sensing applications and comprised of two parts - an IR ...
SEE-104020006
8.56€
Grove Led Bar is comprised of a 10 segment LED gauge bar and an MY9221 LED controlling chip. There are 10 LED bars in the LED bar graph: ...
SEE-103020012
15.14€
Max Rating: 30A 250 VAC 30A 30 VDC Cable included
SEE-101020038
4.39€
This is a Grove interface compatible Magnetic switch module. It is based on encapsulated dry reed switch CT10. CT10 is single-pole, single ...
SEE-104030006
5.92€
Chainalbe RGB LED based on P9813 chip which is a full-color light source LED driver chip,can provide constant current drive and modulated ...
10.53€
The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery ...
SEE-101020026
5.92€
Voltage: 3.3-5V Distance:10m Cable included
SEE-103020005
4.39€
Max Rating: 10A 240 VAC 15A 120 VAC 10A 24 VDC Cable included
SEE-103010002
21.94€
GrovePi+ is a system with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi. It is the newest version compatible with ...
SEE-101020025
2.85€
The tilt-switch twig is the equivalent of a button, and is used as a digital input. When the switch is level it is open, and when tilted, ...
7.45€
Analog joystick similar to PlayStation 2 5V/3.3V Compatible Analog Output(Maximal value will be got when the button is pushed)

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice