Analog 2-axis Thumb Joystick with Select Button + Breakout Board

7.17 8.68€ VAT included
Rated 0/5 (0 Votes!)
Model: ADFC-512
Manufacturer: Adafruit
Adafruit

This mini-kit makes it easy to mount a PSP/Xbox-like thumb joystick to your project. The thumbstick is an analog joystick - more accurate and sensitive than just 'directional' joysticks - with a 'press in to select' button. Since it's analog, you'll need two analog reading pins on your microcontroller to determine X and Y. Having an extra digital input will let you read the switch.

The pack comes in three parts - the joystick itself, a soft-touch rubber 'hat' and a nicely designed breakout board. We designed the breakout so that you can attach the joystick to a panel easily - every other breakout we wanted to carry had the mounting holes so they were in the way of the joystick movement! A 5 pin 0.1" spaced header makes it easy to connect either in a perfboard/breadboard setting or free wiring. You'll need to solder the joystick into the PCB using a soldering iron and solder, but its very simple and will only take a minute.

For more information, please visit this products webpage.
More products in this category:

Buy Adafruit Europe Official Distributor »

More Featured Products
Vacuum Pump - 12V
Description: This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. We even used one to make our very own ...
16.78€
Ultrasonic Range Sensor HC-SR04
This is a non-contact distance measurement module. It’s designed for easy modular project usage with industrial performance. Features: - Detecting range: 2cm-4m - Best in 15 degree angle - 5VDC power supply - ...
2.13€
LilyPad Coin Cell Battery Holder - Switched - 20mm
Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be ...
2.23€
VL53L0X Time-of-Flight Distance Sensor Carrier with Voltage Regu
This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. The VL53L0X uses time-of-flight measurements of infrared pulses for ranging, allowing it to give ...
12.90€
Pressure-Sensitive Conductive Sheet (Velostat/Linqstat)
This conductive material (also known as "Velostat" or "Linqstat") is a nice addition for your wearable/sensor hacking toolkit. It's pressure-sensitive: squeezing it will reduce the resistance, so it's handy for making flexible sensors. ...
4.96€
Europe Official Distributor
Adafruit
Pololu
Sparkfun
Makey makey
Lilypad
Arduino

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice