Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM

5.96 7.21€ VAT included
Rated 0/5 (0 Votes!)
Model: ADF-2310
Manufacturer: Adafruit
Adafruit

Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi A+, B+, or Pi 2 with this jaunty prototyping HAT kit.

To kick off the Adafruit HAT party, we have this Perma-Proto inspired plug in daughter board. It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes are connected underneath with traces to mimic the solderless breadboards you're familiar. There's also long power strips for +3V, +5V and Ground connections to the Pi. Near the top we break out nearly every pin you could want to connect to the Pi (#26 didnt quite make the cut).

This is just the basic version of our Perma-Proto HAT.  It comes with a printed circuit board and a single 2x20 GPIO Header for Raspberry Pi to put your Perma-Proto on top of your Raspberry Pi (like a nice little hat...) This version does not come with an EEPROM so you can 'stack' it with other HATs without worrying about an EEPROM address collision.

You can customize your Perma-Proto setup using a standard 2x20 stacking header or extra tall 2x20 stacking header. You can also swap out the 2x20 header with a slim 2x20 type if you want it to sit closer to the Pi, or an extra tall one if you want it to sit above the USB/Ethernet ports.

A bit of light soldering is required to attach the header to the PCB but it's easy work.

This hat is only compatible with the Raspberry Pi A+, B+ or Pi 2! It will not work with the Raspberry Pi Model A or B.

Our initial version has the +3V and +5V markings in blue, and the GND markings in red, future orders will have these colors swapped to better match a solderless breadboard

 


 

For more information, please visit this products webpage.
More products in this category:
Customers who bought this product also purchased
Weather Meters
Description: Whether you're an agriculturalist, a professional meteorologist or a weather hobbyist, building your own weather station can be a really rewarding project. When you're measuring ...
67.50€
Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor
Bosch has stepped up their game with their new BME280 sensor, an environmental sensor with temperature, barometric pressure and humidity! This sensor is great for all sorts of weather/environmental sensing and can even be used in both ...
21.85€
Copper Tape Conductive Adhesive 50mm 15m
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass ...
17.45€
Standard Servo HD
This Standard Servo is the higher-torque option providing 56 oz-in at a speed of 0.18 seconds per 60 degrees of motion at 6 V. Dimensions Size: 39.5 x 20.0 x 39.6 mm Weight: 41 g General specifications Speed @ ...
13.02€
BarePaint Conductive Pen
Bare Paint is just like any other water-based paint... except that it's electrically conductive! This means that you can actually paint wires onto things like models, clothes, furniture, walls, almost anything you can think of. Standard ...
12.59€
Reflectance Sensor Array QTR-8RC Pololu
This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pairs of LEDs are arranged in series to halve current consumption, and a MOSFET allows the LEDs to ...
9.01€
Raspberry Pi Perma-Proto Breadboard PCB Kit - Half-Size
This is the half-sized Raspberry Pi Perma-Proto Breadboard from Adafruit, a simple solder-able-type bare PCB kit that affords you with the luxury of soldering in your own custom prototype with GPIO connection capabilities to a Raspberry ...
8.59€ 4.30€
Solenoid - 5v (small)
Description: Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers.This smaller solenoid is designed to work directly with 5V which makes it a great match for ...
4.54€
Europe Official Distributor
Adafruit
Pololu
Sparkfun
Makey makey
Lilypad
Arduino

Electan uses cookies for the operation of the website, monitoring site performance and to deliver interest based content.

Accept & Close

See privacy notice