We use cookies to ensure you get the best experience on our website. See privacy notice

Buy Seeedstudio In Stock

Displaying 1 to 80 (of 80 products)
VAT not included
4.39€
The RS232 to TTL converter module is widely used in radio modifications,phone flash, XBOX360 flash, GPS, vehicle detection, DVD flash, hard ...
1.10€
The cylinder can be used for Raspberry Pi. It protects Raspberry Pi from such as short-circuit. Features: Screw Diameter: ...
0.84€
Dimensions: 4.5x3.5cm. Self-adhesive backing.
5.24€
This is WiFi serial transceiver module, based on ESP8266 SoC.
3.73€
This cable is designed for Electronic Bricks
4.39€
Max Rating: 10A 240 VAC 15A 120 VAC 10A 24 VDC Cable included
7.46€
This Moisture Sensor can be used to detect the moisture of soil or judge if there is water around the sensor, let the plants in your garden ...
1.24€
The kit is consisted of transmitter and receiver, popular used for remote control. Basic spec: Frequency: 433Mhz.
9.00€
This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity ...
9.89€
This is a SMD BLE module used in our BLE Bee and Xadow BLE. It is based on TI cc2541 chip, enables robust network nodes to be built with ...
4.39€
This water sensor module is part of the Twig system. This sensor works by having a series of exposed traces connected to ground and ...
15.36€
The new version of XBee Shield is a standardized and stackable shield compatible with Arduino. You can easily stack any modules from the ...
2.85€
The tilt-switch twig is the equivalent of a button, and is used as a digital input. When the switch is level it is open, and when tilted, ...
26.11€
The Arduino SideKick Basic Kit is designed to be used with your Arduino. It contains everything needed for a first-time user to connect ...
5.92€
This cable is designed for Electronic Bricks Length: 50cm.
13.60€
As an expansion board, Base Shield v2 has many Grove connectors, making it convenient for you to use Grove products together. And It is ...
5.92€
Chainalbe RGB LED based on P9813 chip which is a full-color light source LED driver chip,can provide constant current drive and modulated ...
21.28€
This consists of two parts, a module holding an 16 character by 2 line LCD, and the twig itself(most may receive the two-units-soldered ...
4.92€
ESP8266 is a ultra-low power UART-WiFi module. It has excellent dimensions and ULP technology compared to other similar modules. The module ...
21.72€
Mega Grove Shield is an extension board for Arduino Mega which allows to connect the Grove modules.
11.44€
Each EasyDriver can drive up to about 750mA per phase of a bi-polar stepper motor. It is permanently set to use 8 step microstepping mode. ...
8.96€
AC Current transformer split-core. Max 100A.
8.95€
Having tested this module, we find that it is supported by Raspberry Pi out-of-the-box (testing operation system: Raspbian) 802.11b/g/n
4.39€
This brick is based on a poteniometer, rotary angle from 0-300 degree. Cable included
7.46€
The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect ...
8.96€
AC Current transformer split-core. Max 30A.
2.75€
Cable included
8.43€
The NodeMcu is an open-source firmware and development kit that helps you to Prototype your IOT product within a few Lua script ...
10.97€
This gas sensor detects: Carbon Monoxide, Coal Gas, Liquefied Gas Cable included
9.00€
This slide potentiometer is a linear variable resistor with a total resistance of 10k. When you move the lever from one side to the ...
40.59€
The Relay Shield utilizes four high quality relays and provides NO/NC interfaces that control the load of high current. Which means it ...
10.53€
The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery ...
30.72€
BLE Shield 2 stands for Bluetooth 4.0 Low Energy Shield version 2. It is designed to work with Arduino boards, including Arduino Uno, Mega ...
12.07€
Alcohol sensor is semiconductor sensor for alcohol detection. It has good sensitivity and fast response to alcohol, suitable for portable ...
30.50€
This Grove - BLE utilizes an HM-11 module to provide your Arduino/Seeeduino with serial BLE function, and it can be used with ...
32.75€
Grove is a modular electronic platform for quick prototyping. Every module has one function, such as touch sensing, creating audio effect ...
5.92€
Voltage: 3.3-5V Distance:10m Cable included
10.53€
The Grove - Gas Sensor MQ2 module is useful for gas leakage detecting. It can detect LPG, i-butane, methane, alcohol, Hydrogen, somke ...
8.78€
It’s a small PCB that adapts the Wii Nunchuck connector to standard 4-pin header. It's called the “wiichuck adapter”. It plugs directly ...
30.50€
Is an easy to use bundle created for experimenting with XBee and XBee compatible standalone wireless modules like RFBee and Wifi Bee. Every ...
32.69€
The module provides precise measurement of barometric pressure and temperature in the environment. The air pressure can be measured in a ...
29.82€
DevDuino Sensor Node V2 is a compact Arduino-compatible microcontroller and is designed to build wireless networks based on transceiver ...
23.04€
This is a non-contact distance measurement module, which is also compatible with electronic brick. It’s designed for easy modular project ...
6.34€
Pack list: 1X Barrel jack adaptor-screw terminal to 2.1mm male 1X Barrel jack adpator-Screw pluggable terminal to 2.1mm male
36.09€
CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly ...
99.75€
Carrying a GrovePi+ board together with 12 carefully selective Grove sensors with 10 pieces cables , this starter kit gets you up and ...
4.39€
I2C Hub Grove is an extension Grove module for connecting multiply I2C devices to Grove Base Shield.
23.04€
3-Axis Compass module, a member of twig family uses I2C based Honeywell HMC5883 digital compass. This ASIC is equipped with high ...
23.04€
This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity ...
11.52€
Out dimension: 113x70x25mm Inner dimension: 110x65x21mm
13.60€
This is a simple to use PIR motion sensor with Grove compatible interface. Simply connect it to Stem shield and program it, when anyone ...
9.00€
In this Grove gadget, we utilize a TM1637 to scale down the controlling pins into 2 Grove pins. It only takes 2 digital pins of Arduino to ...
4.39€
A temperature sensor based on thermistor. Can be used to detecting environment temperature. Cable included
2.85€
This protoshield allows you to add your own circuitry or components to your Grove system prototypes. This allows you access to all four ...
8.56€
Grove Led Bar is comprised of a 10 segment LED gauge bar and an MY9221 LED controlling chip. There are 10 LED bars in the LED bar graph: ...
15.14€
Max Rating: 30A 250 VAC 30A 30 VDC Cable included
30.50€
3-axis Gyro module based on ITG 3200. It is the world’s first single-chip, digital-output, 3-axis MEMS motion processing gyro optimized for ...
355.46€
DSO Quad is a pocket size 4 channel digital oscilloscope for common electronic engineering tasks. It's based on ARM cortex M3 ...
20.84€
Starter Shield is a perfect start for beginners of Arduino world. You can learn and practice basic soldering tricks and programming ...
19.53€
Raspberry Pi RS232 Board v1.0 is a standard communication port for industry equipment.This module is base on MAX3232,which is a dual ...
5.49€
This is a joystick very similar to the 'analog' joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two ...
4.39€
This cable is designed for Electronic Bricks Long. 20cm.
4.39€
Vibrator Grove is consist one coin type motor which is a Permanent Magnet coreless DC motor. It vibrates when the input is logic HIGH. It ...
5.92€
This is a simple touch sensor brick, it used TTP223 touch detector IC, you can use this brick to replace the traditional physical push ...
4.39€
This is a Grove interface compatible Magnetic switch module. It is based on encapsulated dry reed switch CT10. CT10 is single-pole, single ...
9.87€
This Piezo Vibration Sensor is suitable for measurements of flexibility, vibration, impact and touch. The module is based on PZT film ...
15.14€
This 3-axis Accelerometer module is based on MMA7660FC with Digital Output I2C. Can be used for sensing data changes, product orientation, ...
151.40€
DSO Nano v3 is a Digital Storage Oscilloscope designed for basic electronic engineering tasks. Within its smart shell, the device runs on ...